Recording, September 8, 2010 — Toyota Camry, 3.5 liter, 2007

No, there are ABSOLUTELY no problems with the body kit :) It’s just that we are not talking about this, but about different trim levels and, in fact, varieties of Toyota Camry USA / Canada Edition
There is no XLE SE as you wrote! Perhaps you wanted to emphasize these "SE" body kit from 2.4 ... yes! But there is no Camry 3.5 XLE SE! Here! :)

I can't figure out what's the problem with putting a SE body kit on the XLE? and notice the reshotka on the SE is not the same as mine, is there a tiptronic on 2.4?

100% this is your SE! ... all the more so since the way you write XLE SE is impossible, these are completely different configurations! SE is 2.4 and not full 3.5 and XLE is 3.5 and full!

I was also surprised when I came to buy it, when podezhal to her immediately drew attention to the door handles that they do not have buttons to unlock the doors!

XLE and on the key? …this is at least a rarity! In our city, all XLEs are the same and everyone has a button (Smart Start & KeyLessGo) ...

I have XLE, I put the body kit SE, and I have to start with the key!

He has a Camry (American) 3.5L SE and it's not a fact that the cabin is the same on the XLE (full set)!
For example, resetting "MAINT REQD SOON" is different, because starting from the key, and on XLE from the button ...

several times I tried to perform this combo, but nothing happened, it seems that I did everything in the specified sequence ... why is that? ..

INSTRUCTIONS FOR DISENGAGING ANTIBUX! (for Toyota Camry)

1. Make sure the car is in Parkigne and the parking brake is on before you start.
2. Turn on the ignition (Start the engine).
3. Apply the handbrake.
4. Fully depress the brake pedal and then release.
5. Fully depress the brake pedal and then release.
6. Remove from the hand brake.
7. Fully depress and hold the brake pedal.
8. Put on the handbrake and remove from it (the brake pedal is pressed).
9. Put on the hand brake and remove from it (the brake pedal is depressed).
10. Release the brake pedal.
11. Put on the handbrake.
12. Fully depress the brake pedal and then release.
13. Fully depress the brake pedal and then release
The procedure is considered successfully completed when the system disable icon lights up on the instrument panel (vehicle on a slippery road).

Is this the total mileage? resets.

How to reset MAINT REQD on the dashboard!

1. Insert the key into the ignition.
2. Turn the ignition key to the "ON" position
3. Turn the ignition key to the "ACC" position
4. Press and hold the TRIP/ODO…
button 5. Without releasing the TRIP/ODO button, turn the ignition key to the position "ON", six dashes "------" will appear on the display, do not release the TRIP / ODO button! until all dashes disappear and the display shows "000000"...
Everything is set to zero!.. release the button... turn off the ignition...

Before starting the operation, the speedometer readings must be switched to the TOTAL mileage display mode. if you turn off the car with the displayed "daily" mileage, the maint req is not reset!

reset oil change, every 5000 miles lights up (MAINT REQD) oil change.

Yuri, do you travel with a printout? When you want to slip, you take out the instructions from the glove box and follow? ) ) ) ) )

At first, YES!

Pavel, when I bought it, I was only interested in one thing: how to turn off antibuks!

And how to turn it back on? Or does it turn itself on? )

turns itself on!