Alteration of taillights-2 + night photos ... - Toyota Caldina, 2.0 liter, 2000

buzz =) it makes sense to compete with that plum, by the way))) she really has the best time in the quarter 11.9, BUT! monoprivod is very dependent on temperature and weather! =)
ps went to yurtima immediately came to the track;)

the last time I measured it, I was driving at a pressure of 0.9 (I found out about this after the measurement) the car was not moving (I drove 13.5, this is a bad time for my Calde.
Now I set the pressure to 1.3-1.38, the estimated time is 12, 8-12.9 I will pass.

well, if I'm sober, then yes)))) they brought wine to work today))) I feel Monday will be difficult))))

By the way, I didn’t go in vain on Saturday, we went to Yurtima, there were a lot of rivals for you =) a vryksa of 99 that drove half the route sideways, or, for example, a drain 15 body on awesomely soft rubber =)

By the way, how high is your quarter time?

ATP) see you in the evening)

mine diodes are very handy got up! =) must be seen live! =) IMHO super ;)

not bad enough, I support, it is necessary to see it live.

on Thursday you can =)

I like it :) it turned out great!

Look carefully! I'm waiting for photos of the night)

Thanks! I can't wait myself =)

Looks great!

feet are on fire?

no, the dimensions are lit in the photo, the feet are bright on top and on the sides, under the turn signal

I myself think about this
on Thursday we will check it out

Clearly, I thought that the feet were diode! Then it's normal!

well, it's 100 times better than the stock one))) why see the dimensions during the day? =))

Everything is fine! But it seems to me that during the day what the hell will you see!

night tough guys)
then finish the turn signals in the rings

Cool!

Very beautiful.

Thanks)

It turned out cool Zhenek, respect!

ATP =)

I agree with Slavik's comments. Really lights in the subject.

ah… great! only nickels

It’s cool that I came up with it, I also wanted to do it myself, but the lights don’t shine, flat LEDs don’t fit ((((

matter in principle in the headlights, change to Restayl! and everything will work out))

Cool, I wonder if the lights have red glass like mine, by introducing LEDs inside, will it be possible to see this glow of the diodes? :)

white diodes with a red glow, did I understand correctly?

of course you can, but you just need to set super-bright and white ones)

Nenene, nafik you a red glow through the red light filter on your headlights, take the white light. IMHO

I'll take a picture one of these days

I can’t catch up with what kind of tape in the lanterns - the same as the backlight of the bottom? www.russia-type.ru/images/big/09777.jpg or www.energoff.ru/img_goods/original/img_88.jpeg end glow?
If possible, take a macro shot of your lights without turning on the light.

I bought myself diodes in the backlight of the number plate ... 5000k seems to shine well, so I think in the feet and dimensions with turn signals to change the meaning is there or will it not be visible? I also think that's how they are friends with the standard reflector?