Wires — logbook Toyota Carina 1996

After buying acoustics, of course, it was necessary to rustle the doors and buy wires, but first things first.

Let's start with the wires: Yes, again I had to go around all the shops until I found at least something worthwhile.

So, we have
2m tweeters - TCHERNOVAUDIO Cuprum Junior One SC
Conductor cross section - 0.75 mm2.

Mids:
4m – Daxx S62 Studio Edition
12 Ga (3.5 mm2)

I also bought connectors and terminals, otherwise there was nothing in the kit (somehow strange).
I took a soldering iron, acid, tin, a heat shrink tube, a sharp knife and (most importantly my hands))), and began to solder this thing.

First we clean the wire

Then we twist with the wire from the tweeter

Drip acid and solder

As a result, we get in the background

We operate in the same way

The next day I went to the garage to stretch the wires in the door

We remove excess plastic to get to the corrugations

Actually corrugation

After wrapping the ends of the wire, pushing through the corrugation and getting into the salon

At the output we have