Alteration - Toyota Chaser, 2.5 liter, 1998
I started by actually going and taking off the headlight. It’s raining outside and I’m dismantling the car early in the morning))) To get to the headlight, first remove the turn signal by unscrewing the screw and gently squeeze the turn signal in the direction of the car. Then we will see two nuts. Unscrew them and one of its bolts is clearly visible in the area of ​​u200bu200bthe radiator grille. Then I unhooked the bulbs, closed the hood and carried the headlight home. I put the headlight in the oven and turned it on for 7-8 minutes. Then, after this time, we put on some kind of gloves and take out the headlight. it is hot. After the oven, the sealant becomes like chewing gum. I took two flat screwdrivers and gently peeled the glass from the case. Well, then I washed everything separately, rubbed it and dried it.
Issue price: 0 ₽
Yes, the whole problem is only in the light. Otherwise, everything seems to be fine
Well, how did it help? I thought to put the lens in the headlights, but I didn’t even think about this method somehow.
Yes, it helped. Only you also need to do the same on the right headlight. I passed the technical inspection.
Well, yes, there is no left-hand drive analogue, which means there are no headlights as needed ... sorry
Not badly confused, but as for me, all the same, the checkmark should be, BUT on the other hand. That's why it is needed so that the side where pedestrians are illuminated further than the oncoming lane. IMHO ... safety.
Then, most likely, I will install the lenses. I want to have a normal light on the car.
I did this on the brand, it turns out that 15% of the light start is lost, I recommend the lens, the light becomes both correct and the spot is larger.
although well done, when with your own hands it is always good and creditable.
Thanks for the info! Yes, I don’t want to go far. If anything, I’ll contact you for installation as I decide)
I compare my light with other lenses, so far only in Lexus jeeps I noticed a larger and brighter spot, but it doesn’t differ from branded Hond volvo in any way. if you decide, then lenses with an h7 h11 base fit in the d2r base, and I don’t advise you to put a lot of problems in the far base and a chapel appears in height, although it looks beautiful.
tell me how the beam has changed what it has become under the euro or american light