3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First

While the bumper was being painted - logbook Toyota Corolla 1988

While waiting for the bumper to be painted, I decided to make podiums for the speakers
myself ... I didn’t take a picture of the process and I won’t describe it, everyone probably understands, the more it is painted on the internet, so it makes no sense to repeat it. If anyone is interested, please ask and I will answer.
In general, I tried my best, especially since this is my first experience, so do not judge strictly.

    Toyota Corolla 16 1988    Toyota Corolla 16 1988    Toyota Corolla 16 1988    Toyota Corolla 16 1988    Toyota Corolla 16 1988    Toyota Corolla 16 1988

214 Comments
Sort by:
z
zizu 26.01.22

Thank you, I also bought a stabilizer for myself, I'll measure it by diameter, tomorrow :)

G
GEK 26.01.22

In order:
I also really liked the rear shelf =)
in the doorway, I didn’t lean the upper edge tightly against the card, so there’s a small pocket, it’s even better, otherwise with old pockets there was always a bunch of garbage there was a
stabilizer, D = 24 mm

z
zizu 26.01.22

Not frail rear shelf! :) And the door podiums had to be made with pockets in my opinion)
By the way, the question is, do you have a front stabilizer for cars?

G
GEK 26.01.22

Thanks a lot for the compliment

s
slogman 26.01.22

Competent work! Well done!

Z
ZlOader 26.01.22

Cool podiums!

G
GEK 26.01.22

Under the tweeters, I probably got excited that I covered it with a Carpet, I’ll probably redo it later.
Most satisfied with the back =)

G
GEK 26.01.22

Thank you

F
FionbI4 26.01.22

done well...

G
GEK 26.01.22

The shelf is old, I reinforced it with a layer of plywood from the bottom, I already screwed the support for the rings and the rings themselves to it, without settling the shelf, it will sag from the weight of the speakers.

b
buffalo bill 26.01.22

what did you make the shelf out of?

G
GEK 26.01.22

type yes

b
buffalo bill 26.01.22

like fiberglass?

G
GEK 26.01.22

I made pockets from plywood according to the shape of the pocket, then rings with guides, tights, resin, and finally covered everything with carpet.

b
buffalo bill 26.01.22

what did you make the podiums out of?

G
GEK 26.01.22

The sound is normal, of course I'm not special in all the subtleties, but on the inside you need to make a hole. It’s better to make the rings yourself or ask in the carpentry shop, I cut them out with an electric jigsaw slowly, it turns out fine, the rails are made of rails, if the shape is complex, you can take it thinner and glue it with hot glue, if you dream up, then let’s say for making a guide or the shape of the whole structure, you can take fasteners from suspended ceilings, plastic pipes, plastic slats …

d
denMAGNITKA 26.01.22

Listen, how's the sound?
and another question - where do you get the rings and guides for the speakers in the podiums?

G
GEK 26.01.22

there is nothing complicated there, it seems so)

m
maracorolla 26.01.22

nifiga the first time super!

G
GEK 26.01.22

nomano =) just right =)

c
catyapa 26.01.22

fucking shelf

t
toxa-r13 26.01.22

well done)