How time flies ... and how it is not enough ... - Toyota Land Cruiser Prado, 2.7 liter, 2000

Greetings to all! I haven’t written anything for a long time, but in spite of everything I occasionally worked on the car, I still have something to show
:) . it was necessary to leave access to it - in the new "floor" we make a "Hole" - in the future it will be closed with a plywood lid on self-tapping screws if necessary (God forbid :) ) this cover is unscrewed and voila - free access to the gas tank hatch! After fitting and pr.-floor is ready and fits perfectly into place,

Floor fasteners - 2 M6 bolts through the body (regular seat fasteners) - DEADLY :)))

we take out everything (floor, all plywood rings, etc.) - and soak everything with drying oil (in order to avoid problems with moisture in the future)

For now, let's leave the whole thing to dry and return to our film - we tighten the hood, there is no photo of the process - somehow there were no free hands :)

And yet, something is not right … what? Of course, ept! :))) OPTICS!

In my opinion, this pradik looks much ahem ... meaner chtoli :)))

At the same time, we also change the rear optics to LED

Beauty:)

We also casually sniff a chrome-plated horn :)))

It turned out to be impossible to cover the native hatch with sculpting (more about it here: www.drive2.ru/cars/toyota...863888206335/#replieslist ), I didn’t want to spoil it either, so I bought the same hatch at the disassembly (by the way, from a diesel pradik :) ), tightened it with a film and immediately put it on the car:

couldn't resist and took a picture:

almost, almost ... damn it: (((
Next, I removed the front bumper and prepared it under tight:

Rear air duct grille (by the way, it was sealed to death with Shumka, so now it performs a purely decorative function :) )

Back to our rings

we start fitting ... extremely approximate :))))

taktaktak…3 subs on each side?! dada, that’s right :))) 2x3=6
in total there will be 6 (:))) ) subs Rock 15s, while the truth is I have 5 of them (the 5th one I bought recently, sixth in line). Why did you decide to increase their number from 4 to 6? Yes, the place allows, power too, why not actually? :)))) We
"glue" the floor with the sidewall into a single whole, abundantly pouring everything with resin and glass mat

I ran the wires into the back door to the widths and food (2x12 Ha acoustic):

Slowly but surely, how to warm up ...
PS By the way, who cares: I'm selling my batteries (there is one 75k Optima yellow = 9 rubles left) - write to anyone who is interested. I will put Amer's gel ones, more powerful and with M6 bolts instead of terminals, in order to connect copper buses with zero losses to them.
In general, the project is alive, there will definitely be updates before winter!
To be continued, stay tuned...