Noise-vibration isolation of front doors — logbook Toyota Land Cruiser Prado 2005

Actually the photo report of this process itself =)

1. In general, I forgot to take a picture =)
2. I removed the armrest, the cap at the handle, and the power window control unit. And I got access to the screws that hold it:

He unscrewed the screws, removed the triangle of the mirror, inserted his fingers into the grooves from below and pulled it towards himself, snapped off the lower caps and steel on the sides, then pulled up and *OP*, she is in her hands =) He removed the cables and disconnected 5 chips.
And she is in my hands (on the ground =)):

3. Censorship seems to have missed it))) Well, in general, this is what is under the skin:

4. Here I already removed the speaker and tore off the standard film and glued the vibration isolator:

5. And here with soundproofing material and one technological hole sealed:

6. With the second:

Done))) And collect everything back =)

PS Work with gloves and what is the thread with long sleeves, I didn’t do this now it’s scary to look at my hands - everything is cut, the metal is sharp =) The machine tasted my blood ХDDD