Power steering belt replacement - Toyota ist, 1.3 l., 2002

In general, here I am laying out essentially a photo report on replacing the power steering belt.

Prehistory in the previous entry.

Brief instruction:
... By the way, if a large belt bursts, it can boil, and the cool light will light up. Jew. red, so if such an attack befell you very accurately, with stops to let the engine cool down, we get to the garage or the station, change there, ... raise, remove the protection, then we need to loosen the small belt, loosen the two bolts of the pump GUR, remove the small belt, change it. ... well, in the reverse order, we put everything in its place. change it. ... well, in the reverse order, we put everything in its place. change it. ... well, in the reverse order, we put everything in its place.

IMPORTANT! tightening torques of the power steering pump bolts - 45 Nm
It is necessary to observe the correct tension of the belts.
At the same time, you can check the state of the power steering fluid, I have it transparent with a very light shade of yellow, they say that it should be so, we monitor the level.