Stance Fitment - Toyota Caldina, 2.0 liter, 2000
While the engine is disassembled, attention is paid to such an important factor as the departure and landing of the car relative to the disks. Since TEshek Subarovsky has the 38th flight, the wheels sit deep in the arches, which is by no means comme il faut (never a CFM if you want%) ...
Here's how it was, before:
ass
20mm spacers decide before:
ass
It remains to take the collapse in front to an even deeper minus (to the existing 1.13 degrees). Although, since there is only one block under the hood, and when installing the entire muzzle, the muzzle will drop lower, maybe the sidewall of the rubber will be flush with the arch ... Let's see in general. And, I feel, I will have to roll up the rear arches. In the pictures you can see the new Rays fetish nuts, sorry, not Guan D1. It remains to find Rays center caps, and nipple ones too ... In the summer, some bastard twisted them ... If anyone has it, beep.
Here are very vivid examples of fitment, like a balm for the soul. Something to strive for.
Well, it's just that, in the end)
...
We allegedly build edros :) But how long will these roads stand ... Probably, they will disappear together with snow :)
Very uneven, and you? :)
If there were Korean-Chinese guano that is lying around in every store, I would choose. Right there, for the TE37, I hunted for a long time, and finding discs for a humane price with my departure is practically anrial. Therefore, I had to take with Subarovskom departure.
you just need to take wheels 2 sizes larger and less offset. And spacers are not needed and it looks beautiful! ) but a step in the right direction
Don't say it… You'll show your KIT later;) I'm glad for you, IMHO, only in such machines you start to feel like a man.
it turns out this fitment is called =) what you can’t do for the sake of beauty
Beautiful! Toka wanted to comment on the main page, but here I look - everything is already as it should :)
I have not traveled yet :) Let's see if it clings, then I'll roll it out. Logically, it shouldn’t - I’ll take the camber even to a minus, and the wheel itself, when damping, does not go strictly vertically, but, as it were, diagonally.
Lenich, well, what can I say, affectionately, affectionately) I think the arch should not be touched.
nuts in general relish)
Yes, leave these discs. I'll be stress-free. Wheels need to be wider, on the VD it makes no sense to have wheels more than 7.5 wide.
<< here are very vivid examples of fitment, like a balm for the soul. Something to strive for.>>
fitness (combined two words together: lol:) corrected, but the boyish tightness? Again - you can't put tires on it - the supercar is powerful. What to do?
Lenich
To be honest, I don’t even know ... I don’t remember the width of Kaldosovskaya, the departure is the most from 38.
I'll take a look, unsubscribe) if it's about stock
the bolt pattern we have (5x100) is not ice)) I myself look through / select from the 16s.
To be honest, I don’t even know ... I don’t remember the width of Kaldosovskaya, the departure is the most from 38.
and what is the width and effective offset on the pictures?
j8 et42 is Kaldin's size, no pics?
Lyonya, your disks seem to have offset 48 in the same place:? .You promised me a link ;)
I thought about my own… When I measured it, they didn’t seem to be very inside, considering the width:?
The young man did well! The Japs would go crazy! Come to my blog (Japanese mother) there are useful sites.
strive, strive!)
it is a pity that in Irkutsk there is not a single normal stance car, which is sad :(
Hello. Yes, some kind of noname, 25mm. For the summer there will be 9J wheels, with an offset of +25, it will be ebayshe). And of course the collapse in the master's minus))) Soon I'll overcook the levers.
Yes, I also need to set mm 25, ketai is reluctant - there is a lot of negative for him, but there is no money for the brand! :))) Yes, and 25 mm seems like a point to me!
Then well, them ... do not put a 35 mm spacer? This gesture is simple!
Maybe I'll find interesting wheels for the season.
my respect.) please tell me, on regular calipers and disc 17 with cutting 215 45 17, what spacers to put so that they don’t cling to the arches and so that there’s nothing to change. now my car, and if it’s not difficult to advise ...)