Suspension repair or got our roads ... - Toyota Corona, 1.8 liter, 1998
Due to the quality of the road surface on the roads of our vast country, the support bearings on the apron of the shock absorber struts staggered. Decided to change.
At the same time, I also ordered polyurethane stabilizer bushings from the Tochka Opory company (they are due for advertising;) )
Here are the bushings themselves
A little sweat...
set the right side
then left
Here is actually the old support, in the bearing of which there was a decent play
This is already installed, after simple manipulations, a new support
By the way, in addition to all this, I found a torn boot on the left stabilizer strut
I got out of the situation by completely flushing the tip, clogging the new lubricant and installing the anthers from the used one. tips for Chevrolet Captiva (thanks dad for dusters!). Of course, this option is temporary.
PS: After all that has been done, the thump at the road junctions has disappeared, the suspension has become more knocked down. Vripncipe is satisfied with the result ...
Issue price: 4 000 ₽