Write more interesting posts, they help a lot! — Toyota Mark II, 2.0 liter, 1993
Today I went to adjust the glass of my Mark so that the doors close smoothly, but now it’s like in a UAZ. The glass rests strongly and does not allow the door to close normally. If you let them down, then everything is fine. So you need to regulate!
But, alas, nothing happened - it turned out that one guide was broken at the glass and it dangled a little. Accordingly, there is no point in adjusting it :( The mood fell, so something went wrong with the second glass too ...
When I change the guide and adjust the glass, I will definitely take a picture of everything and sign it in detail, because many people have this problem.
But finally I changed the sealing ring of the distributor, which I have been lying around for six months! Fortunately, I found a post that inspired me for this replacement: www.drive2.ru/cars/toyota...4044232465378709415/#post
The work turned out to be really about 7 minutes. Thank you very much, IliaMarkSib for this report!
Therefore, write more posts about your repairs and improvements, your experience will help hundreds of other people!
This is easy to correct - at the top of the door near the glass there is a guide that sets the angle of the glass in this direction. I solved this problem immediately with a bang! But the rest is more difficult.