Help out with advice =) — logbook Toyota Corolla 2004
Meaning right away on the case, in the car before me, some ghouls at the sink broke the lid of the glove box, the one above the ashtray, namely, they broke, as it were, to name the type of pin or needle, on which the door is put on, as it were, whoever saw will understand in general, there is only one spring on the door, just on the side where this needle was broken, and the previous owner ordered a whole new beard for 7 K. I don’t want =)
I don’t use this drawer in principle, and if I close it, it doesn’t open on the go and doesn’t interfere with me in any way and I can’t see that it’s broken =)
so I think that I can refuse to deliver a new beard ...
... and the idea was long overdue with just this drawer and the lower ashtray, namely, after working a little
to put the maf into the box, I took an approximate photo ...
... and instead of an ashtray, bring out the ignition panel, I threw off examples from other projects =)
and also give advice on your native mafon, attached is a photo from the tuning studio ON-STYLE who did what I want ...
... namely, the screen and the circuit of the on-board computer were taken out of the mafon itself and adapted to life in the car, so I’m thinking of disassembling and introducing it somewhere else. I want to know about consumption and other things, at least approximately, and it already has a red backlight, which I now have everywhere =)
in general, photos are attached to all ideas, so comment and advise, there is little time left, =)
The idea is great. Unfortunately, many of my friends have already broken this compartment. You can tear out the door and make just a pocket, processing it with something. But I liked your idea with tubers more, they just ask for it themselves! ) The tape recorder will be out of place there! You will not see it, and it will be difficult to manage it.
uhm, well, everything is simple with ignition, the ignition panel can also be made of aluminum or carbon-look film and it’s there, as a native, it’s easy to cut neatly in shape,
but with a mafon xs, in principle it’s quite convenient, it seems to me, you just need to tinker a little with fiberglass to give it a normal look , and this is done from the fact that there is an idea to try to shove the sensors into the native place of the mafon. I don’t want to screw them onto a dashboard or a roof rack, but if there are 3 pcs. it will turn out to shove it will be very harmonious =)
I agree, it’s just such an idea with a mafon, because VOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOD, I repeat, only maybe it will be necessary to put a couple of sensors 3-4 pieces into the car, mount on the roof rack IMHO kalhoz and unreadable plainly, on the panel itself on top is also kalhoz, I want organicity and integrity,
then you can tell me what is more adequate =)
ahem, well, sobsno, I want to achieve the same current, put the mafon itself in there, I would leave it under the lid, but it’s broken, it’s rvz and I have a maf with USB at two =)
so it’s better without it
using the link of a deal like a cool one with saving that chot it was, I also had a changer lying in the glove box on the second day flew out of the car like a cork =) why is this box needed?
and so here is a useful photo with the receiver, thanks =) the question is how convenient it is to use? =)
I also had a bottle of water fall off the torpedo and grunted in the same place. I don’t get tired, I just don’t put heavy objects on the open anymore. And about the radio tape recorder, look at the link (in my opinion it's cool, and the computer remained) www.avtozvuk.com/az/2006/01/014-018.htm.
+1/ Collective farm. And distributors and everything else ... you can carefully make a line of sensors, but again there is no point at the bottom, and why do you need infa ... look at how they do it in zzbrozers
for me duck these kolkhoz tumblers!
do not spoil the car, put a normal mess :)
or very carefully mount some sensors there and solder or glue the cap
disassemble the regular mafon, where the lower part is separated, but the twists will have to be soldered ... details at tembl4
Well damn, same problem! just stuck it on! and that’s it! and I don’t open it, I’m looking for analysis ... it costs 1k
And I have the same trouble, only they are just broken = (forget my advice!
but about the mafon, you can if you want! a friend of mine will put the dividends there, and in a regular place the TV is native Japanese, like this =)
ahem, I don’t know in thought, I’ll refuse one fitg of a new beard while I’m going like this, if I’m ready to do it, then I’ll think =)))
thanks =)
I would advise you such an option, which I myself will do:
instead of a standard place, an LCD monitor in the whole hole :)
Instead of a pocket, a radio tape recorder, because. She will be much more comfortable there! I myself think I was convinced that reaching up with my hand is not convenient and distracts me on the mechanics, on the machine I didn’t care - right now it’s not very good (and the radio tape recorder should be with DVD to turn the clips :) and the rear view camera - well, this is already like a bonus - when I thought about it was toned tightly.
and instead of an ashtray (I don't smoke) a place for cards and change.
Check it out, it might be interesting...
so, I'm waiting for advice =)
hmm, yes, I also think what for, I also have nowhere to shove this screen later =)
my computer stood somewhere for 12-15 hours =)
Refuse, it broke for me too, during the installation of all the music, etc., I fixed it, I can help you too ;) I don't regret at all.
in general, for the time being, he
refused the new one, it seems he figured out how to do this without gluing it,
if I get an entry in the BZ with you in the highest score =)
the mafon is still in its native place, t.to. above still buy an adapter for steering wheel control, and remove xs from the changer =)
if I put the ignition panel, then only when it is relevant, now it’s not =)
xs sensors where to put and it’s too early to put them, there’s still nothing special to measure =)