3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First

Where does the sound come from! Or rather a knock? .. Or replacing the rearmost pillows between the frame and the body. — Toyota Land Cruiser Prado, 3.0 liter, 1997

The knock in the rear of the car began to overcome for a long time. I looked at everything, there was no result. The whole hodovka is intact, nothing hangs anywhere. knock on the rubber band! .
In the evening, I began to look for "martyrs" on the drive. And O MIRACLE! I'm not the only one www.drive2.ru/cars/toyota…42498#a288230376153931207
My assumptions were confirmed!

             Toyota Land Cruiser Prado 30 1997


after jacking up the body a little over the frame, having previously loosened the rest of the pillows, except for the front ones

             Toyota Land Cruiser Prado 30 1997             Toyota Land Cruiser Prado 30 1997


I searched a little about how the studs were picked out. Lithuanian eccentrics stuffed a bunch of foam into the holes, so for a long time I couldn’t understand why they didn’t shove into the cabin until I removed the back trim

             Toyota Land Cruiser Prado 30 1997


This is how the pillow fell out.

             Toyota Land Cruiser Prado 30 1997


It was not possible to find the pillows from the UAZ offered by a colleague in misfortune, but ten silent blocks of the front beam caught my eye in the store, and for the place of the proposed lower silent blocks from the gas 66 handout, I found silent blocks from somewhere with the rear axle gas 53, although, to be honest, I think it’s good there a little from them

             Toyota Land Cruiser Prado 30 1997


after baiting the salent block with a vice, I used a universal press

             Toyota Land Cruiser Prado 30 1997


and so pressed out the old pillow

             Toyota Land Cruiser Prado 30 1997


pillow adjustment process

             Toyota Land Cruiser Prado 30 1997             Toyota Land Cruiser Prado 30 1997


the second pillow customized already more glamorous

             Toyota Land Cruiser Prado 30 1997


she's already there

             Toyota Land Cruiser Prado 30 1997


An hour after installation, I was already far out of town! I went fishing, and involuntarily caught myself smiling after a bump, because nothing knocks! Hurray!
PS Why handmade? Because not here, not in Almaty, they are not available, but from the emirates to wait about 3 weeks, and the price is $ 150 somewhere.

Issue price: 220 ₽
214 Comments
Sort by:
m
marselle 03.02.22

sure! Posts like this don't go to waste! =)

D
Dyoba 03.02.22

Thank you! I think it will be a good guide for Pradovodov!

m
marselle 03.02.22

great report...
I wonder what's going on under my body?! =(

D
Dyoba 03.02.22

Fuck knows, I did not touch the front!

s
somebody 03.02.22

Greetings! Do front airbags need to be jacked up if replaced?

B
Berserker 03.02.22

Well done!

e
eltonn 03.02.22

Great work done by you! In the spring I'll do the same with a replacement, tell me, do I need to remove the rear bumper?

D
DV84 03.02.22

hi, is the jack right on the wheel and in the fender liner? there was no fear that you would bend the arch?

2
2701860 03.02.22

Fierce collective farm

2
2701860 03.02.22

the most interesting thing is that the rear pillows are unscrewed differently. There the nut is welded from below and you need to turn the bolt from above ...