Salon upholstery. Personally) - Toyota Chaser, 2.0 liter, 1998

Thank you))) I was embarrassed))

details of the interior of the car on the handle of the girl looks very nice!

Thank you) In fact, the main goal was to make it neat)

smart girl! everything was neatly done!

Well, I don’t know) the main thing is that there is a desire))

diligence is needed here ... I probably would have succeeded in waves and bubbles)

Thank you) The film is thin, elastic, stretches well. The main thing is that no air gets in. do not stick everything at once, but iron it often, step by step. when you get to a convex or concave part, you yourself will already understand what to do with it, you can still heat it up, it will be better to stretch. And so I just installed the details on something strong and just kind of pulled this film) I still have a smell in this film - then I'll post a photo, here it is generally semicircular and I only managed to do it the second time)

It turned out great! Can you tell me how to wrap it like this? How are the convex parts or vice versa concave?

Thank you) and as I have seen enough of the photos of beautiful salons, so immediately go to the store for the film and sculpt)))

It turned out great) At the very hand they won’t reach to do it.

Thank you) I try))

What a young lady)

I already thought about it

Now you also need a snake on the console of the machine :)

Well, I will help with the choice of a new teaser!

I will do so on the next Chayzer))

You should not think about the snake, but put it))) I can help!

well, OK. =)

Well, I'm talking about the garage and I'll think)) where I can find it)

what is there to think? =) either wait for heat … or a garage. =)

well, you know, if you accelerate)))) with doors, you can think of something) I find out, I'll let you know)

class =) and my door to your house will enter? =)

yes)) at the moment, cilia and a tuning grille for the Forester lie next to me)

Yes ? any first orders? =)

if anything, please contact)) business has already started))

well, now you can do your own business, by constricting parts in 3D carbon =) it doesn’t look bad! I also want to roll up the door pillars in carbon fiber.

And I salute you brother

Salon sister welcome =)

Thank you))) do not praise only so often, otherwise I will be arrogant))

Well done! :-) carbon fiber looks great, much better "under the tree", a separate bravo for hand-fitting!

Thank you, I tried hard)

very nice and neat!
well done )

Why is this?

in short, I realized that my hands are still growing out of the wrong place ...

thank you) I'm glad that you like not only me)

It turned out cute! liked it very much)

thank you, thank you)) especially for the "mega cool"))))

a girl and a car is already a poisonous combination that leads to delight!
and the girl who is afraid of tuning is just mega cool;)
it turned out very neatly! smart girl!

thank you)) I really tried) at first something didn’t work out, I redid it and brought it more or less to the ideal))

in terms of quality, you could give odds to many Novosibirsk "tuners"! Well done. It's nice to see such a high-quality work, and even done by a girl)

Thank you) 3M, they told me he was of good quality, so I took it)

When dealing with film, I know that it is not an easy task.
Well done.
What carbon? 3M or Oracal?

I’ll take it into account) to be honest, I didn’t meet Oracal here, maybe I was just looking in the wrong place)

)) I do not argue the quality.
but there is one BUT, 3M has a very good memory and with a temperature difference, in places of stretching, it can be assembled back.
At the oracal, this problem was solved)), as they tightened it, it will remain so.

Thank you very much) good luck with this edle)

It turned out very beautifully, with the fact that it was incomparable, you also need to update your carbonium

thank you, thank you)

It turned out great!

Exactly!) thanks =)

"As they say, until you do it yourself, no one will do it"

For me, it’s more correct: if you want to do it well, do it yourself. The film seems to stretch really well - the cigarette lighter handle is very neatly fitted.
respect!

that's for sure))) already in the process of work you will connect your imagination, and there will already be several ways =)

okay, you have to take it yourself and I’ll understand everything)) eyes are afraid - but hands do it)

hello =) well, I just cut and glued the sides separately, and the one that can be seen in the photo, lastly, cut this "rectangle" along the contour from three sides and pasted it down =)

hello, listen, how did you make the panels on the doors to open the glass, there are holes in the same place, how did you do it perfectly there? with a hair dryer or a finger poked))))?

Thank you =)

Clever, it is clear that she tried!)

Thank you)) I think any girl, if she wants, can do anything))

Well done! I thought that only guys are addicted to this and do it themselves, but here you have a girl on you, and everything is neat. There are simply no words. Well done!

hmm thanks =)

stunned!) cool!

thank you thank you))) embarrassed)

just super, the girl is engaged in such tuning, +5 and many times. thrush.

Thank you) I realized that in fact you can learn everything - there would be a desire)

you're smart... it was really nice to see...))) fell in love)

A piece of wood there is not the topic somehow))) everything is in carbon fiber, but here on you the detail is covered with wood. The conversation is about the 10th photo, where the phone is ... And it looks original. Although the tree is also not bad!

Thank you) This film is designed more for smooth surfaces, almost perfectly even and preferably glossy. So with hands, I think everything is fine))

It turned out cool! I wanted to cover the glove box with carbon fiber, but it didn’t work out, either the hands were crooked, or the film was not ice. And degreased and blew with a hairdryer, hopelessness ...

Thank you) The main thing is to buy a normal film, it has a good adhesive layer, well, it’s good to heat it so that it stretches and fits well on these very corners)

It turned out great! Well done!)))
I’ve been going to do this for myself for a long time) How to glue the corners correctly so that they don’t fall off? For example, where are the power window buttons))))

9 years ago, when the post was written, making a kettle was considered a success. Now find a live stock car is luck. Everyone is screwed…

Carbon is so hackneyed