Productive day. did MOT and something else interesting =) — Toyota Corolla, 1.8 liter, 2004
Mmm… I’ll probably start from the beginning…
Saturday… I wake up from the alarm clock, the first thought in my head is “hell, back to workâ€, I pick up the phone, I look, it’s 07.30 in the morning, I gradually understand that I don’t have to go to work, but what the hell am I did you set an alarm? Oh yes, I need to go to the service, somehow I got up and got ready, at 08.00 I fell out of the house while driving to the opposite end of Moscow, I managed to drive on Saturday's tight Moscow Ring Road, ride with the Lacetti, I don’t go, and the Selik T23, it’s going well =)
arrived in service as it should be by 09.00, and even a little earlier, I managed to take 2 pictures on the street while waiting for the opening ...
fuff a lot of text ... we will accelerate, in short, we opened up, asked what to change, and what to have with me, it turned out that something that I don’t have with me and they should have, they don’t have it, but this is an oil and air filter and candles, but oh well , the lifts are busy, they drove my breakaway lift to the exit and first of all they began to change the springs on the RS-R TI 2000 and the brake discs with pads, removing the wheel showed that the discs are livelier, and the pads while I was sleeping someone put me fresh discs and pads at night we clean it, we start changing the springs, the guy got a little thoughtful, so I got all smeared and took to help him, and it was hard for me to stand and do nothing, we remove the right front, and here you are. stock shorter than mine, stock on the left, RS-R TI 2000 on the right
I’m at a loss what to do, well, I think it wasn’t, we’ll put it on and we’ll immediately see the difference, apparently the whole effect of PC-R in the middle turn is much larger than the others, we put the wheel, we drop the car, the effect is obvious, I’m positive again, the shoes are all in hell understand what =) well, okay =) they changed the front, everything is fine, we start changing the rear ones and then what a miracle got out,
I have in stock and installed a native rear spacer, an analogue of the front one. Unexpected joy =)
But again the problem arose similar to 3zz
on the rear amortization, the spring does not sit completely in its place, as much as 10-15 mm; the diameter of the rack is larger than the diameter of the spring and how to put it in xs, who put it, tell me, the butt didn’t sit down normally = (
then they rolled me onto a normal lift, changed the oils in the gearbox and engine, only 2 liters got into the gearbox =)
and bled my brake system, like it turned out not superfluous, the difference is noticeable =)
then we decided to unscrew the candles and see what happened to them,
it turned out to be a full F with them, as you can see in the photo, and with all four, they showed a guy who was like a deputy there, he brought me the same ones and said "350 rubles apiece, are we changing?" I say yes of course! =)
ps they still didn’t know that I came for free =)
in general, this was the end of my MOT, I went and explained what and how with the car and that I wouldn’t pay as much as 9.5 kilorubles =) The
deputy made one call and said, “well, go = )
the previous owner will be a little surprised when in the estimate he sees the removal of the installation of springs =))), but oh well,
he left the service, damn the difference in the behavior of the car is heaven and earth, these are all candles, apparently mine are completely dead =)
rolled out to the Moscow Ring Road ... yeah, here it is that familiar feeling that was a bit forgotten in my mind, the game of the steering wheel to the sides, and no straining =) then the springs made themselves felt =) in the same place on the Moscow Ring Road, I felt a wild difference in the dynamics of the car, candles whisper again =) and in braking ... the liquid also made itself felt with the old iron, well, yes, everything is clear, although with the 2nd on the springs it is much more interesting than with the 3rd, fact =)
I came home, parked the car, went home sharply, had a bite , a friend called me, I said come out, changed into something dirtier and went outside, then the heat started =) the
right middle xen does not light, the lamp cannot be reached, the ABS block is in the way, it’s decided, we remove the headlight, it’s necessary when you study =)
to remove the headlight, it turns out to remove the bumper, while we remove the bumper, we understand that in order to remove it, we need to remove the headlight, a small batch of brains for 15-20 minutes, somehow digging around and unscrewing a whole handful of bolts, pulled out the bumper, but not all, left the bottom in place, here everything is simple, I removed the headlight, replaced the lamp, but did not put the headlight in place =) there is another set of xen, the bumper has already been removed, it is necessary to carry out blocks to the PTF =) they found a good place, right under the headlight, fixed it, they didn’t have time to put the second one, put the headlights in place, put the side bumper latches in place and like it stands as expected =)
as a result, I hung out on the street for about 4-5 hours, probably =)
but it was worth it =)
tomorrow I will put the second xen block, plug in the lamps, xs how I put the bumper and you're done =)
now the fogs are at home, I’m thinking of trying to wash them from the inside, although it’s dumb for the reflector =) I’m tired of writing, I’ll write off the additions in response to your comments =)))
tomorrow I’ll try to add pictures of what happened in the end =)
we read, appreciate, evaluate, and don’t forget about comments =)
zs2 quarrel that he is dirty, did not have time to wash =)
Issue price: 0 ₽ Mileage: 81�200 km
aka-mazai
Well, you waffle =) at least first asked about the springs … from a Japanese car I wanted to put on a vehicle … Is the hood out of color?
And the candles in the photo are quite lively ... I see no reason to change them
and what's wrong with them? I put them on 3zz =)
the hood was in color, it was just very sunny =)
it was sooooo much sense to change them, before, as it turned out, the car just drove stupidly =)
aka-mazai
Well, you waffle =) at least first asked about the springs … from a Japanese car I wanted to put on a vehicle … Is the hood out of color?
And the candles in the photo are quite lively ... I see no reason to change them
candles started to pass =)
all shot through with gases! .. did the right thing that replaced ... I'm sure I felt the difference ...
Well, you waffle =) at least first asked about the springs … from a Japanese car I wanted to put on a vehicle … Is the hood out of color?
And the candles in the photo are quite lively ... I see no reason to change them
corollaz
springs udvili))))) sensitive … cha exhaust girlfriend … vapshe looks! go nuts! .. I look at the pictures and I think something is missing now I understand! SPOLERA! even near the checkpoint is the heating of the seats? mirrors?
what about my exhaust?
dooooo spoilerma is not enough =)
where to find?
seats =)
on the mirrors, in theory, heating along with the rear window, well, it was on 3zz, but here xs =)
corollaz
springs udvili))))) sensitive … cha exhaust girlfriend … vapshe looks! go nuts! .. I look at the pictures and I think something is missing now I understand! SPOLERA! even near the checkpoint is the heating of the seats? mirrors?
Yes, Miha is heated seats)
springs udvili))))) sensitive … cha exhaust girlfriend … vapshe looks! go nuts! .. I look at the pictures and I think something is missing now I understand! SPOLERA! even near the checkpoint is the heating of the seats? mirrors?
EXCBoy
cut? Is it possible to cut cones?
maggi suggested hodovka D2 =)
xs I really like her
there will be a spoiler if I find where to get it not for 13 K =)
yeah, a mirror with auto-dimming, a cool thing, especially since I haven’t tinted the
rain sensor yet, I found out the current when it started to rain =)
xs mirrors with a glare or not, like ordinary ones, etc. To. there are no color differences =)
TRC can be switched off as well =) an infection on wet pavement in 1.2 gears a little if you push it immediately works =)
the question is, do I have any thread of the block in the box?
Wait, there is a torsen ... not LSD
aaaaa = (
ahem, in principle, I should put my ass to the end, or if the option turns up to be worse, although it will probably be better at 17 =)
the car looks somehow awkward, it seems to me, the muzzle is on the ground, and the butt xs is just like =(
ankind
There is a block for software)
Well, what to do, I think if you can cut half a centimeter, then you can.
D2 xs finally, oak stop!
well, in principle, yes, but I think there you need to cut everything 3-4 cm =)
and for this, everything should be disassembled and removed again, now if only in the summer =)))
Why do I often hear bad reviews about TEIN?
on red krutetsky =))) if you underestimate how ndao it will look very relevant =)
and on gray it’s somehow slobbering, there should be aggression, but here there are some smooth lines =)
vkontakte.ru/photo-451840…#photo/-4518402_116690164
is it the same as the gray one? looks better on white
where to look for these? auction?
well, you have eared, but the principle of construction is one like =)
I want something else =)
where to get it?
just do you want something like continuing the roof, and not like you and Lekha, I like them better, can Ken Block steal him from the fiesta? =)
yeah 1.5 will be what you need, not a lot, not a little =)
I would like to find a spoiler where the thread is interesting =)
aaaaaa
ahem, you need to find an lsd where a thread, at 1.5 it will be nice, I think, well, on the edge of 1.0 =)
they took off my Kuskovskaya and put a stock, it is weak, does not hold well and slips with it like crazy
yakov
Why don't we have blocks?
you do not have?
vrolde its current have you removed?
yes, what kind of block is this ... some kind of crap, 1-2-3 goes into the box in the wet
There is a block for software)
Well, what to do, I think if you can cut half a centimeter, then you can.
D2 xs finally, oak stop!
cut? Is it possible to cut cones?
maggi suggested hodovka D2 =)
xs I really like her
there will be a spoiler if I find where to get it not for 13 K =)
yeah, a mirror with auto-dimming, a cool thing, especially since I haven’t tinted the
rain sensor yet, I found out the current when it started to rain =)
xs mirrors with a glare or not, like ordinary ones, etc. To. there are no color differences =)
TRC can be switched off as well =) an infection on wet pavement in 1.2 gears a little if you push it immediately works =)
the question is, do I have any thread of the block in the box?
I don’t see another option to cut the spring, I think it will help!
Candles ran out specifically, even worse than mine!
Lateral support seems to be more, but not by much)
The gear knob is curved well, we have an even one) As I understand it, there will be a spoiler soon ?! =)
In general, the salon is healthy, I like it!
What about a rearview mirror with a dimming button? is there a rain sensor? Are the side mirrors anti-reflective? TRC - switchable? =) there are still a lot of questions!))