Troit, Perdit, Lives his own life... :) — Toyota Mark II, 2.5 liter, 2001
The other day I noticed that the Engine began to work unevenly ... The revs either drop to 400, then by themselves, standing at a traffic light, they drop to 1.5 :) At first, I sinned on the poor quality of the fuel ... Today I decided to buy a Fuel filter, an Air filter and bought a PIAA with a vitamin for one salon C! :)
There is no photo report, Mom flew to Thailand with a fotik to be brave, and my phone grunted for a month already ... I go with a balalaika from Samsung for 500re. :)
So ... I started with a simple one, changed the air filter, proceeded to the fuel one ... took off the rear seat, turned everything off and took it out ... I took it apart ... In general, something very black poured out of the fuel after I tapped it with a hammer, similar to ink or even more like working out with mileage at 100,000 km :) Carb Cleaner Gzoxs chtoli blew the mesh on the pump, then with air ... assembled, loaded, connected ... By the way, I put a pump from the 80th turbo supra, a friend drove it to me. Further, while I was in Boxing, I decided to clean the rhyme with the same cleaner ... I took it off, blew it, blew it ... blew it, bled it ... Shines! :) I fitted all the hamutiks on the cooler (There were thoughts that because of this troit ...)
I'll take it, it's ok. While bibi is working I take off the glove box to change the salon one, take off the cover and take out an empty frame in the dust. That is, the old owner went without a salon ... :) I put, I collect ...
I drive out on the road back and forth, I pressed it a couple of times and again the revolutions began to heal with their lives ... again, it’s about to stall, then it holds 1.5-1.7 revolutions. a check lamp has joined them ... :) PPC! Psihanul went cracking and poperdyvaya to the guys familiar to the scanner ... They heard me long before I drove up ... :) We stick the scanners, and then everything becomes clear! VVTi valve error :) :) Everything becomes clear ... It's already 8 pm, all shops and disassemblies are closed ... I pull the chip from this valve without a way out and go home ... :) Tomorrow I'll go to the Toyota center, buy a brand new one with a discount ... but for now I've arrived to the house with a check for that on a smoothly running Engine ... :) The price of the issue is the price of 3 filters
Fuel 2500 Original TOYOTA
Air 700 Original TOYOTA
Cabin 750 PIAA
I drive a 1996 Mazda MPV, and so the tachometer doesn’t work there almost =]
almost always lies at 0 or tries to show the right amount, but before it falls
my revolutions also live their lives, they are even but higher than expected, the computer did not show anything (they tried to set them less, so she returns them to their previous position, even if they are set lower,
but in general, when I have nothing to do with the car, the sounds of breakdowns, knocks , squeaks) ) ) I come for diagnostics - everything is in order pah pah pah of course, but I already have mania in my opinion) ) )
By the way, you can try to give the throttle body for cleaning ... it saved many ... :) Although mania can also be! :)
By the way, yes, and the speed is not bad, it turns out that you abruptly release the pedal and go down smoothly ... that is, there is no sharp jerking forward ...
Hey! I have the same problem today! the main thing is not expected. twitches, revs themselves rise to 2000 then fall and stall. Also the check engine light comes on from time to time. I turn it off for a while, then I turn it on and for a while everything is fine, then it starts twitching and stalling again, and that's after when you let off the gas. ie all the problems in the WWti valve?
Yes, there is a steam in the valve, well, judging by the signs, it will definitely show you the current scanet. Without a mona chip, ride at least lope if you are not annoyed by a constantly burning check, and such a good consumption in liters is 25 per 100 ... :) :)
it means that the valve is wedged in the normal position that the oil pressure remains normal … I say, it is necessary to the scanner! he will definitely say grief in the valve or clutch ...