Реснички для Чайзера — Toyota Chaser, 2.5 л., 1998 года на DRIVE2

So, I have long wanted to buy cilia for myself. But I didn’t really want to buy eyelashes that were "like everyone else's," but I couldn’t find the eyelashes that I liked on sale.
And so I decided to make them myself. I would have done it a long time ago, but due to lack of time and desire, it did not work out.

And so, today I decided to devote the evening to my typewriter.)

In the afternoon after washing, I bought everything you need to make eyelashes:
1. Epoxy glue + fiberglass
2. Jacket tape
3. Clay film
4. Brush
5. Gloves
6. Beer :)

Next, it was necessary to remove the headlights themselves.
I took off the headlights, but with difficulty - one bolt per headlight was firmly stuck. and for this I had to fight with them. (by the way, probably the most difficult thing in making eyelashes)

By the way, due to the fact that our GT garage was jam-packed, we had to leave the car on the street near the house, and on this occasion sealed the headlights with tape) and pressed the car as close as possible to his second car, so that less attention would be attracted by the headless chayzer )

When the headlights were safely removed from the car, they were covered with cling film, so as not to splatter with glue.

The next thing I did - I pasted it over with tape and circled the cilia pattern on it.

Then he spread glue with a hardener. (Do not pay attention to the candle :) I did not find anything better to stir like an NGK candle)

The glue is ready - we put the first layer of fiberglass

That's it!) A start has been made! the first layer lies. and since epoxy needs to dry for a day, tomorrow will be continued!)

I'd like to say thank you ~ ALF ~ ( www.tourerv.ru/forum/memb...hp?mode=viewprofile&u=640 ) from the TourerV.ru forum for the article www.tourerv.ru/?show=articles&view=26
because if not for this article, I would hardly have decided to make eyelashes myself!)

to be continued ... :)

Price tag: 1 000 ₽