release, help! Need help! — Toyota Corolla, 1.8 liter, 2004
In general, I don’t know on the right path, I went, but after much thought and arrangement of plans for the car, I made some conclusions that I weighed something, something was not, and in the end it was decided, we will do a lot of release =)
it remains to decide:
1. What make?
2. Where to get?
for 1 point ,
we leave the collector that costs the
section - 51 mm stock, does it make sense to switch to 61?
well, cut out the catalyst and put a pipe or a flame extinguisher instead (WHAT is better?)
what to do with the resonator?
I don't want to leave it. as I understand it, its section is much smaller than the section of the track, there is no buzzing, it’s stupid to cut it, the car will become a herd of slaughtered pigs and buffaloes and will most likely make a bunch of indecent sounds, this is also complete crap,
what to do with it?
what to do with lambdas? I understand there are two of them, to put some kind of snag or something else?
well, it will probably be considered the main thing for us to replace the catback-finish of the track, and then
point 2,
where to get it?
pieces of pipes and if you need a plamik, I will find it everywhere, but where to get a competent catback xs, I
'm waiting for your help, maybe someone knows or knows someone who knows where to get or bring
Well, just in case, a trifle is one,
how will we display it?
I always dreamed of two pipes on both sides,
but now I understand that it smacks of a certain style, glamor chtoli automobile and you probably understood me
, or the classic version is one pipe and more =) and most likely with an exit angle, such as under the railway, because we want to get together =)
now I’m more inclined towards one and sideways =)
I honestly stole the pictures from zz-brothers =)
seems to be a little sideways
it's simple as a classic option =)
like two
here is the current och some small and meager
but these are strong =)
I need your advice, and links and phone numbers, etc. for communication
, thanks in advance to everyone who mastered the read and commented =)
which are you talking about?
I don’t even like the second link, they are some kind of semi-stock chtol =)
although I don’t know, by the way, they have such katas at the very beginning or what?
xs what will come of them,
here on the first link they are ardent, but here's what happens if you put them in one system x, won't the car have 2 different sounds?
yakov
1 umbrella remains and 2 crap is screwed in and it kind of gives a signal that the mixture is normal and the motor works as it should :)
that’s just where to get it I don’t know ... search and ask on the Selick forums
www.toruku.ru/items/view/423
=)))
yakov
why do you need protection?
extra 15kg?
I live in the "village" and I don't need it
www.toruku.ru/items/view/417
how do you like it? don’t eat what kind of ZIS? =)
damn it’s good that there is nothing besides catback, you do the rest right away on the corolla yourself
and look very even nothing like that =))))
bliiin at the course of two different ones in one photo, but I thought that this is one system, just forked = ((((
15 kg is better than hello bira
Yakov, believe me in Moscow it’s much easier to break through than as you say in the village, I live in the city of hatches without hatches, flying hatches, suddenly appearing bottomless pits, curbs of all kinds, as well as tram tracks that you can’t drive on you can’t move at all =)
so I thought about this miracle, besides, everything can lie under the snow in winter, and I already worked as a snow blower on 3zz, after me the snow was always perfectly even =)))
ahhh, ok ok, well, I think it’s the same for everyone there, so it’s more literate to ask in the service =) it
remains to find the current directly to the bank itself , can the thought itself
be ordered on toruku.ru?
like the price tags are average =)
current, I don’t know how much = ((((
listen to Yash, I just came to my senses yesterday, because now the main thing for me is to find protection and not exhaust, you don’t know where you can find something stronger than stock, I remember smearing something and writing even threw pictures about enhanced =)
1 umbrella remains and 2 crap is screwed in and it kind of gives a signal that the mixture is normal and the motor works as it should :)
that’s just where to get it I don’t know ... search and ask on the Selick forums
What is the point of cheating?
places where lambdas are screwed in at all remain or, as it were, are also cut out and new ones are made?
put it on rutube =)
oh damn, I’m dumb ...
for sure, there are snags :)
there is a record, but for now I don’t know where to stick it ...
yes, well? but in the same place it seems like they put some kind of tricks, won’t it help?
yes laaaan?
make a note =))))
pancake with two asses :( (
the brain will give an error and the motor will work in emergency mode ...
resonators must be looked for at auctions ...
PS: I have a cat now and the car throws a flame in the cut-off :) beauty =)
ahem so in order
9 photo imzo nothing
too godly pipes =)
10 yes power =)
I have 2 lambas, what to do in this case you didn’t write =)
I’ll most likely change the cat to a flame arrester, it seems like a smarter solution =)
where can I get a tuned resonator? or what does it stand on?
although at first you can try to ride with your family =)
I’ll most likely leave the pipe as it is,
here’s 2 or 1 I xs if honestly,
won’t 2 look too bulky on this little ass?
and where to get at least one, I’m silent about two =)
9, 10 photo, I'm dreaming like this, just 2 mufflers without any twists and turns :)
I would also put a spider, 4-2-1. a good topic and really adds hp, but how to say, it costs a lot of money and hp adds not enough, so the most desperate only probably buy them :)
there is no point in making a pipe more, you can screw up in this matter ... the sound will be louder and it will seem to you that it brings down but in fact it will not bring down =)
do you have 1 or 2 lambda umbrellas (oxygen sensors)? ? ?
if 1 lambda, only before the cat then:
-the easiest way is as I did on the last Corolla, carefully cut out the cat and welded a pipe equal to the diameter of the entire exhaust route (51, sort of).
this method has advantages, there will be no twist and everything will come out as it should.
and there is a minus, the exhaust line and the banks themselves will become unusable 3 times faster, it will stupidly burn out, and in Moscow it will happen even faster, because salt and all such crap ...
-The second option is to put a flame arrester!
it will extinguish the temperature and it will not be so wild at the exit, but it is really wild ...
on my Corolla the chrome already turned yellow and the water bounced off like from a red-hot plate :)
and even if there is a flame arrester, the exhaust sound will not become too loud, but with a simple pipe will noticeably louder.
so what else can you be smart with :) )
I would not remove the resonators, because it will yell like a fool!
if you remove them, then only on tuned resonators, the sound will not be wild-loud, but will only become more pleasant and sexier =)
conclusion:
-leave the pipe or digest the entire route to the same diameter, but only it will be all of the same diameter and not with drops, which is not good.
- remove the cut unequivocally, but it’s up to you to cook the flame gas or the pipe, I wrote the differences and pros and cons - well, I
want 2 mufflers, just straight and not turned to one side :)
PS: I'm going to make an exhaust for myself in the spring, I'll probably just remove the cat and replace it with a pipe like on the last Corolla, cheap and cheerful.
and maybe I will be in some places where the track is narrowed to change sections or digest completely, but I will leave the diameter the same or MAX will increase it by 3-5mm
Is there a lot
to put instead of a kat a plamik or just a pipe 51?
why not remake under 61? it makes no sense?
what about the resonator? we have a narrow PPC =(
don't change the pipe! ! !
what is leave! ! !
cut out the cut and put the FLAME HOLDER! ! !
www.foxrus.ru/catalog/plamegasiteli.html
2 pipes are cool and don’t smell like anything, do it if you do it right!
Do you have any more questions or be more specific?
well, they work like a store, but apparently their prices are higher than everywhere else =)
toruku.ru come take a look pliz =)
ok ok
core to help me
and see what kind of outpost
for 24 auto tired all is not an option
but what is more expensive or what?
Korollaz has been looking for a jar for more than a year =) he can’t find everything ...
aka-mazai
Two pipes bad! One and definitely a Japanese catback, preferably not loud ... On 2zz, so the release is good, you can cut out the catalytic converter, an increase in the diameter of the pipes will lead to a decrease in traction at the bottom and an increase at the top! It won’t go at all stupidly at low speeds ... so don’t bother. Pants yes, there is sense if you find
Well, apparently for now I just cut out the cut and put the jar back. there is little chance of finding a catback and if there is, then wait for it xs how and how much =)
there is ... I wrote, they are more expensive! There’s just such a picture, about 10-15 mufflers are immediately sold
well, I’d rather take it for all 78, but I’ll take a normal one than a tired and rumpled one for 3-4
, it remains to find it =))) or a person who will bring it, I’m just xs like =) I don’t want to wait for the auction, I would like to find something that is already on hand yes =)
It is desirable that without a run across the Russian Federation. Lots of them at the auction. Look at the core!
There are people who are purely engaged in banks, there are auction ones that are a little more expensive than 5-7 rubles, but they will serve for a long time. Consider I have a bank for a year and a half
and how to find out if you are tired or not,
what can you say about toruku.ru?
help out in the search for Earrings, you're in the subject =)
… core dot ru. farpost dot ru =) many sites, many cans, but you don’t need to take the tired one
where now to find a good cutback or at least a stupid jar to weld the crepes yourself later?
Two pipes bad! One and definitely a Japanese catback, preferably not loud ... On 2zz, so the release is good, you can cut out the catalytic converter, an increase in the diameter of the pipes will lead to a decrease in traction at the bottom and an increase at the top! It won’t go at all stupidly at low speeds ... so don’t bother. Pants yes, there is sense if you find
and why are they so cheap
1 - even some kind of incomprehensible what is it just do?
2. as I understand it, china taiwan or something nearby =)
3 such an interesting and jasma besides =) and oval and not round will cling less =) but isn't she tired?
4. Pts big bugs me, besides, the entrance is 76 mm =) from 51 to 76 go PPC =)
5 is not bad =)
but this is all with mileage in the Russian Federation already, right?
EXCBoy
in terms of dimensions? I mean to climb more compactly?
mmm and that's what to look for approximately?
Well, you are lazy as always =) a lot of cans are sold
www.24auto.ru/board/partssell/lot42-499499/
www.24auto.ru/board/partssell/lot40-527271/
www.24auto.ru/board/partssell/lot30 -521927/
www.24auto.ru/board/partssell/lot30-543731/
www.24auto.ru/board/partssell/lot30-472897/
... as you can imagine =) EP. We were redoing the exit from left to right on the runks ... Show your FANTASY =) the main thing is the dimensions, and then you will need a good welder, he will redo the fasteners and the tip
Well, probably the main thing will be the length, well, and partially the diameter?
native? it’s difficult to get
there now neither a jack nor a lift xDDD
in terms of dimensions? I mean to climb more compactly?
mmm and that's what to look for approximately?
It’s hard to find from a Corolla, especially since most likely it won’t suit you from a Japanese without alteration ... you select a simple jar according to its dimensions, then the flange is welded on! In terms of volume, it is desirable from 2L of the machine! With Jasma certificate