About plans — logbook Toyota Land Cruiser Prado, 2007

good plans!
Good luck in their implementation!

thanks Alex)

You are on the right path, comrade! =) Good luck in further improvements :)

I’ll tell you one thing, you don’t need a power bumper and any subsequent nonsense, but I don’t argue, you go to nature, but you’re not an avid jeep, drive through the mud, break your way through the bushes with a power bumper! I often went and go hunting, where a person did not go, but believe me, this is not the kind of car that can be altered for this, it's a pity! remake 100, 200! those who have nowhere to put the dough and sit down on an old car! and the law will be adopted soon, converted, with power bumpers, prepared for off-road, they will forbid moving around the city.

I removed everything) after yesterday I think I can stick a power bumper) mine was allowed. and slowly do under the crook

San in the link is an error i is superfluous =)))
The plans are really grandiose, you need to install a body kit of any kind, it won’t steal a lot of ground clearance, because I drove to EXTRIMa on my own and nothing =)))
When you do everything, put the engine from the LC VX470 =DDD

Thanks Danya answered in full detail) headlights and a high computer right now, the first plans for the
body kit honestly don’t want to, and I want that after point 7, these plans are not particularly important. =)

for DRL tubes must be found. I hope my uncle finds in Urumqi

Attention a lot of bukf! =) ) )
*
*
*
Sanka:

1) heating is a necessary thing. I'm super!
2) 3D carbon is cool, but can it still be painted? Yes, it's expensive, but it looks rich! =)
3) optitron is mega beautiful, just support this.
4) I don’t know, but is it worth it? in the sense that you will feel this difference ?!
5) definitely need to be painted. single color is great!
6) if installed, then install only with LED panel. ADMINISTRATION!
7) yes! TRDishey body kit suits him very well. just everything in the topic and nothing more! =)
But I would have made the angle of the eyelashes sharper, like mine … the
thresholds are also ZerGood!
lights from GX are good, but maybe there are diode ones?

Yes, I just blow out black and don't want to

Headlights with DRL are definitely necessary ... only inside it is not black but WHITE to blow out

The film on the steering wheel is beautiful, I don’t argue --- it won’t peel off ?!

Looks like good plans.

As for the engine --- don't waste your money, well, 2.7 won't go fast, and if you "force" it to go fast, then swap 4.0 of the engine with all the tinsel and work will be cheaper

Where can you make carbon? I liked the photos of the salon, I also wanted to)

To be honest, I don't know yet. but I want to try

Ayana everything will be fine =) you can then process it with an anti-creak and everything will be ok

Thanks, Sasha! :)
I asked people, everyone dissuades them, like if you take apart the interior and then assemble it, then I can turn into an even bigger rattle :(

And where is it on ct? If it is possible to do it ourselves, then I will strain my brother :)

PS: but she has grandiose plans! only good luck! :)

here is Ayana =) bb.ct.com.kz/index.php?sh…omsearch=1&#entry15134747

he has all the colors. do IMHO or silver or brown but current is not black)

Ayan, you can do it yourself. Basically, it's not that hard. You just need more perseverance and remove the details.

And where is it on ct? If it is possible to do it ourselves, then I will strain my brother :)

PS: but she has grandiose plans! only good luck! :)

yes, almost everywhere who does it on wheels. I will probably buy material on the central heating, and I will make some myself. but I will do it after I put a high computer and door handles

dotR

3d carbon. I'm somehow not sure if it's worth using it.
Maybe it's better to save up and make real carbon?

Where can you make carbon? I liked the photos of the salon, I also wanted to)

I don’t know how on a BMW you probably have only one cat)

but on the prado 2.7 there are no kats at all, one kat, two kata (it turns out that I have it) and four kata. Euro 3 probably or Euro 4. I do not know for sure. like this) without catov the car rides more cheerfully. and noisier

but the effect will be awesome! )
let's see how much it turns out. I am planning to do it myself.

it will be too expensive)

real carbon. not film or paint.

those. cast completely from carbon fiber? Or silkscreen?

3d carbon. I'm somehow not sure if it's worth using it.
Maybe it's better to save up and make real carbon?

what exactly is wrong Roma =) ?

Somehow disagree with a lot of things. but it's me, an adherent of stock and classics))

This means the exhaust gases go through a triple path :) 3 katika.

how is it 3 way?

dotR

are you serious?

Siriosna :) On Murik 3 way catalyst.

We did not install emulators :)
But the car was moving! Sometime :)

Seriously, the car actually goes faster. current it is necessary to put emulators on kats, otherwise it will not go like that

are you serious?

dotR

and also, I'm surprised that Murano bypasses Finik, to be honest.

Without catalysts, it seems like 15% of the power is added :) So that's it.

so Murano is also not stupid) Gaziz rides almost on a par with the FX35, on the second one he bypasses by half a body. ask him for sure. he remembers telling races)

o_o!
Was Phoenix alive? just the dates are fast enough! If alive, then respect to Murane!

Gaziz stopped by with Ilishka) circled him.

and also, I'm surprised that Murano bypasses Finik, to be honest.

Thank you. comp and carbon right now the first)

big plans! good luck and funds in the implementation, I am primarily for the computer and the optitron =)

Thank you)

Well, you have set up plans :)
The main thing is to strive for something ...
... it will be interesting to see all this!
Waiting for a sssssssssssssss…
…and Tinky and I have five points!

thank you) of course I will write))))

Yes, great plans. And most importantly - everything is feasible =)
Good luck in the implementation. Write in the BZ, buim appreciate))

AK-90

thank you, subscribe to be one of the first to follow)

ugh blunted))) everything has already done everything!

where should i poke?

thank you, subscribe to be one of the first to follow)

Plans I will say Napoleonic)))) we will wait for the results))

no, I would put a stub from the GX470. SUV chip on 20 rims will disappear

and there are no more disks in the plan to put?

let's cut it) people set it so everything is real

how do you set up a big computer? in the same place, it seems like the whole panel is made for a small one, will you cut it?

Yes, I want to go to Urumqi to get a camera. take everything completely, flash, hoods, lenses, tripod, and more. I'll see what's on the car, ask the price, so to speak) I can bring something to my thread. but I don't know what else. disks honestly do not want to change yet, I already rolled mine. so it’s dangerous for me on the 20s) it’s better to put polyurethane instead of disks. should almost be the same.

and I also want 20 under the original! Well, after winter. Where in China are you going to look? I would also not refuse to take if they are inexpensive.

18th is possible) current, honestly, I did not see anything decent. IAC current, but the 20s under the original are very beautiful. I would put myself. Let's see) maybe they are cheap in China. we'll see how it turns out, I just don't want to spend $2000 on wheels for now, I can put almost everything I want)

18 at least?

I do not know. cheap

By the way, why is it worth cutting out the kata?

yes, we will put everything in time) thanks)

oh how much I want)
respect for the desire

yes, I want diodes, but I think it’s necessary to hang a load on them, so I’m thinking of hanging 100 ohm ones
in it, I also want to highlight it, or rather, glue the luminous tape

I don't think resistors are needed. plugged into the ignition and it will be fine. will you install diodes? I also need to put the current light bulbs with the GX470 to buy and that's it)

I'm going to put the illumination of the handles in the salon, do you think the theristors should be hung?

we haven't found yet. do you have 4 speed or 5 speed? in Russia on the prado forum they sell for 10,000 rubles

Is there any info on the optitron, how much does a new one cost, and where to gobble up and for a second-hand lope, and will there be disagreements with the chips?

yes you can put it. current tidy would find

I have 5 st, 4.0 Arab can you think of something for him?

on wheels. and a new one is fucking expensive

Any hints on where to look?

ladies because I'm looking for 4stup. I don't need a fiver

I will look for! If you meet me please let me know! THX!

you should read the post first. written about plans. thresholds are called these Aerostep)

Good day! And where did you get such thresholds with illumination. I can’t find anywhere instead of regular ones to put it with backlight. To get up in their native nests.
Or is it your door sills?
Tell me please

ahh understood on soundspeed.ru they were

I meant the wrong thresholds))) I know what Aerostep thresholds are))) I mean this ...
If you look at the text, then after your phrase, I quote: "The illuminated thresholds are just mmm beauty. You just feel like an owner Rolls Royce when the door opens. like Welcome to Prado" there is a photo. It was these thresholds that I meant ... Have you already set them for yourself or not. So I'm wondering how they are attached? And where did you order them, if already installed. Thanks in advance!

It's a pity. Thank you.

unfortunately no part number

Do you have a number of chrome trim around the little speakers on the front doors? Or how else to find them? would you advise?