Quick shift TEERDE with your own hands))) - Toyota Caldina, 2.0 liter, 2000
Hello everyone! So I decided to lay out a remake of the stock backstage on a TRD type box, only better and shorter =)
An example in the photo is a remake of Dima aka Demon, on a blue GTT, I did the same, only I don’t have photos (but the process is the same 1in1!
I lengthened the bottom by 4 cm - it turned out to be a "joystick" - unrealistically short and clear inclusions, Dimka by 3 cm)
In short, happy as a child) I advise everyone! alteration takes 2 hours maximum, issue price - 3r, please contact)
On the last photo - Dimka, the happy owner of the short-stroke GTT =)
I forgot to write, after lengthening, the backstage rests on the tunnel and you need to make spacers about 1cm to lift it)
I have already seen a similar topic at GIZMON on the runx, and now the owner of the mechanka himself, I want to make a short-stroke too, are there detailed pictures?
the process of its work is not entirely clear, it will not "bottom" rest against the floor, or did you write about this that you need to make a spacer?
and if you increase it not by 4 cm, but let's say by 2, it will be a bit better than the drain and perhaps it will not rest ... is that right? :)
Look carefully at the first picture - this is how you need to lengthen it, it will immediately rest against the tunnel, that's what I wrote about) we make a spacer under the wings, based on the characteristics of this car (I have 1 cm)
you almost don’t feel the difference by 2 cm, we increased Dima by 3 cm (I increased it by 4 cm) it became a little better than the stock + clearer, I have only 1 cm more - it turned out generally very short and clear! what rests is nonsense, put nuts on and that's it)
IMHO - having traveled for a week, I would have made it even shorter)