Replacing the rear riser or preparing for winter! — Toyota Corolla Runx, 1.5 liter, 2003

Well, the day has come to replace the rear riser)))
It was decided to do the replacement with his own hands at home. In the morning, as usual on a day off, I sat down early in the morning to check the correspondence, read, talked with people and went to the fence to change Stoics. Otkryvab trunk and start looking for where we have to fasten the rack)))
It turned out that you need to disassemble the entire lining of the trunk.
What to do, I'm starting to understand. Having removed the casing, I saw so much dust that it became scary. It was decided for one thing and put things in order in the trunk))))
Cleanliness is a guarantee of health =))
Before I took up to the racks. and began to try to remove the support. And she doesn't want to act. Then he completely removed the rack and began to torment her because the rack was dead, it was not a pity. For 40 minutes he tormented her with a gas wrench, the rod clamped and dismantled it))) Hooray. Then he began to collect the Stoic itself by changing the shock absorber and springs. The trick is that a friend drove the springs and they were tangled with each other))) I started to unravel and didn’t want to, after 25 minutes I unraveled it. I started collecting the Stoics, it seems to have collected everything, but the boot does not hold on, what kind of dregs? Sobral immediately put the wheels on 14 winter no matter how soon. I lowered the jack and the car became higher ((((It's a shame! I started to the second rack, I managed it in 20 minutes and realized that I didn’t put the puck on that rack correctly and the dust boot does not hold, Well. I started to disassemble the first rack)))
That's it. The first time I changed the rack on Ranks)))
LEARN FROM ERRORS)))) I'll post a
photo the other day!