Front dimensions - Toyota ist, 1.3L, 2002
There are many offers of different bulbs on the market, from 50 rubles. and before (in short a lot), I decided to change the light of the front dimensions from yellow to white. In the first attempt when buying 7 diode lamps, it turned out that one shines white, the other slightly bluish, the saleswoman flatly refused to change (Not good). Another time I decided to buy 100r. lamps, 1 diode but bright, a week later one burned out, the saleswoman (the other) replaced it with a new one without any problems. Now I go and rejoice) soon I will replace the interior lighting lamp (2 pieces: front and rear) with diodes, room lights, reversing lamps, well, you can poke light around the cabin) ... but ... then
ps a little later I'll post pictures of the car in different lamps
These diodes are burning like a plague, you have to go to the car market like for drugs =)
I bought these homemade ones, the guy is a former advertiser soldering, for the second month at least figs are shining.
Atas27
it must be understood that an incandescent lamp has excellent directivity of light around the bulb so that it is reflected from the reflector. In the case of a point LED, there is nothing to reflect. And the front side lights will simply not be visible. And the assembly with LEDs and brighter than a light bulb and works the same in terms of reflection in the headlight.
I am not agitating, you just yourself will soon understand this in practice.
In the last photo, my headlight, the size apparently sits in the depth of the nozzle, and the option you proposed with an extended, elongated shape does not fit. ;)
Well, how would I teach physics and perfectly understand what you are talking about, especially a higher technical education behind you, just the device of the headlight on the ist is such that, the use of such lamps (multidiode multidirectional) in this design is questionable) even too clever, in general today I will take a picture headlamp (namely, the place where the size lamp sits) I think you yourself will understand everything.
it must be understood that an incandescent lamp has excellent directivity of light around the bulb so that it is reflected from the reflector. In the case of a point LED, there is nothing to reflect. And the front side lights will simply not be visible. And the assembly with LEDs and brighter than a light bulb and works the same in terms of reflection in the headlight.
I am not agitating, you just yourself will soon understand this in practice.
... I saw such), they are sold in the same place that I bought these ... maybe I'll try, but I think that it's already a little too much)
you need to take something like this www.netuning.ru/index.php?productID=186
and these will shine a narrow point straight ahead
"Wheelbarrow for pumping" shop, on Pisareva, how to turn from red to the right at the end of the FSB school, Roman, there is just no, including LED lamps, I have been on the Kruzak for almost a year and do not burn out (the LED rarely burns out at all)!
Yes, I also checked, I just saw this feature with my own eyes (the difference in shade). and in her hands they shone quite the same color.
Yes, I myself was present when buying, exchanging and replacing these not tricky lighting fixtures that are not in color, sometimes not high, then they will burn out, they will not change, in short advice to followers, check everything on the spot ...