Frequency

timkiller1975
Download Cpu-z utility
And there you look at it, better throw a screenshot of the tabs

Aloska

timkiller1975
Well, running at a frequency of 800 MHz
In two channel.
All right?

Aloska
In my opinion there should be 1066 MHz

If you have a Mat Board supports enhanc profiles you used in the BIOS then Yes, it should be 1066 (533MHz).

DDR2 and that's it.

timkiller1975
Why would it?
What BIOS writes?
Just at the top of the file, you have one die on 1066 and the second at 800 MHz
RAM will always run at the frequency of the slowest die.

Aloska
They're all the same

Aloska
No, there all the modules for the marking of same. Can certainly ProE..to let this manufacturer, but it's in the same CPUz on the SPD tab, we can check for each module in more detail

WraithGuard
All profiles are the same

timkiller1975
Try to get 2 dice.
And see whether to change the frequency.
Poeksperementiruyte. Can contact where to depart.

Aloska
Well, thank you

Yeah, so just need to find how to enable Enhanced Performance Profiles (EPP).
I have a similar thing, only DDR3 and the mother is not able to mode Extreme Memory Profile (XMP) I looked, and I dogged it. Well, only the timings were adjusted manually, because it's their ass kicked not from the SPD profile

WraithGuard
Got it, thanks

WraithGuard
In the BIOS the FSB setting in the title put on the car. Now with 401 to 534 MHz