Power supply problem
Good time of the day guys!Today my resistor on the 5 volt line flew, now I have 10 volts there.
Question: What are the consequences if I don't repair it yet? And how long does it take to repair it?
And how was the malfunction determined, if not a secret? And where did the tension look? And so I took out my old motherboard and found 6.3V condensers on it, and that's not all: many components are powered by 5V. As for me, you can ditch the mother, and the percent, and the railway, and possibly also the video card. So draw your own conclusions. At the very least, I would not recommend turning on the computer before replacing the power supply unit. By the way, what model of power supply is installed and do you use a surge protector or UPS?
Sanchez Ramirez
I have UEFI Bios, the voltage on the lines is shown, the BIOS fuse turned on for such cases
AeroCool Strike-X 600W The
main thing for me is that the computer works for a couple of days and does not fly, I wait for the vision operation and I can not play for a long time, then after rehabilitation I fixed it would.
It's clear. Well, I heard from one expert an opinion about the Aerocul units, and so he said that their filling is not very good, although not terrible, like in Chinese noun names. Although I looked at this block, there is a PFC and even a bronze 80 Plus. Of course, you can replace the burned-out resistor, but I will repeat: if I were you, I would not turn on the PC at all until that moment.
Sanchez Ramirez
understood .. okay, rummaged around here on the forums, really, it's better not to take risks, only bought 970, LAN, thanks