Game freezes help (Crysis 3)
I can’t understand why the game freezes, it happens just with the termination of the program, but sometimes it’s tight and it only helps to reboot through the button. I put it on and fixes from the skid did not help. I’ll go through the mission and start to hang again. Maybe I don’t understand the new hardware.Ga M eR
The problem is in the hardware, I had the same problem. 1. Overheating of the CPU or Northbridge. 2.Video card, screen resolution. 3.The amount of RAM.
What kind of iron?
Personally, I did this: my monitor is not a gaming one, but a TN + Film 1920x1080 matrix, the settings in the game were made to the maximum and the screen resolution was set to 1600x900 in windowed mode. When I start the game, then all the shortcuts disappear and the screen is completely black, even the frames are not visible. That's how I did it. In general, complete immersion in the game and nothing distracts, and the graphics with good anti-aliasing pleases.
wooodooo555 I
also sin on CPU overheating, it appears that the temperature data are different for Aida64 and HWMonitor.
Threat iron in the signature of the profile.
Ga M eR
Try to change the thermal paste if the CPU heats up, and see that the airflow inside the case is also good. This game is very demanding on the PC, so there can be plenty of reasons. In the graphics, remove the shadows and the glare of the sun, also remove the anti-aliasing if you play on full screen. You can set the blackout and anisanthrope to the maximum. See for yourself, you know better what hardware and adjust the game. Although yes, the main reason is overheating!
Ga M eR
follow the path - C: Users Users name Saved Games Crysis3
there is a file game.cfg in the folder - open it with notepad and save this ↓
r_Height = 600
r_Width = 800
sys_spec = 1
sys_spec_GameEffects = 1
sys_spec_ObjectDetail = 1
sys_spec_Particles = 1
sys_spec_PostProcessing = 1
sys_spec_Shading = 1
Ga M eR
should be something like this ↓
- [Game-Configuration]
- Attention: This file is re-generated by the system! Editing is not recommended!
r_AntialiasingMode = 1
r_Moti 1
r_Moti 0.0025
r_TexMaxAnisotropy = 1
r_TexMinAnisotropy = 1
r_fullscreen = 1
r_Height = 600
r_Width = 800
sys_spec = 1
sys_spec_GameEffects = 1
sys_spec_ObjectDetail = 1
sys_spec_Particles = 1
sys_spec_PostProcessing = 1
sys_spec_Shading = 1
sys_spec_Shadows = 1
sys_spec_TextureResolution = 1
sys_spec_Water = 1
Ga M eR
1. The screen resolution greatly affects the video card, the higher the resolution, the greater the load.
2. Regarding the Syndicate, it's either you have a pirate - or the video card does not pull.
Ga M eR
Computer: Computer
type - ACPI x64-based computer
Operating system - Microsoft Windows 8.1; DirectX 11.2
CPU Type - AMD FX (tm) 8320 Eight-Core Processor
Mainboard - ASRock 970 Extreme3 ​​R2.0 Mainboard
Chipset - AMD 970, AMD K15
DIMM1: Samsung M378B1G73QH0-CMA - 8 GB (DDR3-1866 DDR3 SDRAM)
Video adapter - NVIDIA Palit GeForce GTX 770 (2 GB)
Monitor - Acer G236HL [23 "LCD]
Sound adapter - Realtek ALC892 (7.1)
Disk drive - TOSHIBA DT01ACA100 A
In general, the day before yesterday I bought an additional cooler, and put it so that it would blow directly on the radiator of the north bridge. And my CPU is cooled by dropsy. Now I overclocked the PC to 4.0 GHz, and noticed that even with a high screen resolution, nothing hangs like it used to. The case is blown inside perfectly. I thought if it freezes, then the video card will not cope, but no, everything went off with a bang!
In short, I dug around and found out what was going on. with error
Faulting application name: Crysis3.exe, version: 1.0.0.1, Faulting
module name: atidxx32.dll, version: 8.17.10.648,