Airflow, acceleration, temperatures, Forza 5 tests, WDLegion, stress tests

Where to drive it, latency 43.3 ... try to get the memory to 4400 cl17, then we will see the number below 40

Bloodnes
You can try, by the way! And with tertiary timings muddy like before. I can't find a notebook where I wrote down the numbers on them, so as not to sort out from scratch again.

Gott Mit Uns
Yes, there will be a tangible increase, and it will be possible to sit out at least 12-13 generations on the 10th

It turns out that fans with a large air flow in the PC are not particularly needed. The more air the fan blows, the louder it becomes.

Marsj
No, no! Still as needed. The screws are practically silent, and those on the dropsy, I put at 55%. The computer is almost silent. But iron has excellent temperature indicators. With ordinary screws, this was not even close!

Gott Mit Uns
Your vidos is a vivid example of how not to do cooling in your computer. It is more than enough that one valve in the front is enough if there is one seat for it, you can take one 200mm-ku, at the back there is one valve for blowing out 140-150mm with the head, on top of the SVO radiator nothing is needed at all, you put those under it at 100% if the temperature reaches 60C for example. From the bottom in the bottom you don't need anything at all, you have a valve on the side of the lid that draws air inward and in front should be enough above the roof; see the difference. Go give them back or put them up for sale.

Palych Rokov
You are perfectly wrong! I removed all the valves according to your recommendations and left the ones that you mentioned. The temperature rose by 11C, and the cards by 8C !!!!! Therefore, the question is closed. The lower and upper valves are 1000% resolved! I will not sell anything, but I will replace the whole thing with Icebergs, that is, those expensive screws that I put on the dropsy radiator, in order to make the pace even slower. The uppermost case screws, which rotate faster above the dropsy screws (I set their revolutions higher) so that they pick up air from the lower ones onto the dropsy and drive it out of the case from above.

Gott mit uns
I don't know what you removed, you had to remove the valves on top of the SVO radiator, below it should have been relatives from the Arctic, there are good valves, I think there are 140s, you probably also have to set their rotation to a maximum at a temperature of 60s and higher. It is imperative to leave on the side on the side cover, in front of the case, if there is a seat for blowing and blowing out a compartment with hard ones, then leave the one behind, which must be left for blowing out, remove the two behind pindyurki, which are probably 50mm in size, they do not give anything but superfluous noise. Below, in your case, put some kind of grate and under it a fan why ???? Your body is on a pedestal, where does it draw air from you ??? There is no and cannot be any sense from him in principle. On top of the SVO radiator, you can try on the hood only those valves that will operate at the same speed with the lower ones,

Palych Rokov
Native screws on dropsy are nothing compared to screws from Iceberg. I want to order three more in order to put it on the line, as Seryoga did. But first, I will need to completely disassemble the map. He ordered himself two, but smaller ones. 120mm. As a result, the card's temperature dropped by 10-12C !!!! Comp, but it's on the table, and under it is a hole through which the lower screws suck in fresh air and send it up.

Palych Rokov
All screws I limited to rotation. If you set them to the full and which are on the dropsy and in the case on exhalation and blowing, then there will be a hum that the neighbors will hear and no headphones will help, but I will knock down the temperature exactly ten more degrees, like you can't do it.

Palych Rokov
Therefore, we will decide. I want to do one more experiment. Find out the temperature of the operative and the power supply in order to muddy them in terms of low temperatures.

Palych Rokov
But for this I need a new RAM, for example, dzhe skills, the sensor of which can see HW info. But I don't know how to monitor the power supply on the desktop.

Gott Mit Uns
The arctic has good valves, compare the difference in degrees when 2 below between arctic and corsair. I'm even interested.
I do not recommend going into the card and violating the design of the native CO, especially since you can damage the thermal pads during parsing. Just set the native valves on the curve so that between 60s and 70s there is a rotation range of 85-100%. I did this on all the cards and the temperatures never even reached 70c, I don't see any point in lowering it below, if you have it thrashing, it's not because of this, but because of the emphasis on paverlimit. In general, I don’t understand how the upper coolers on the SVO radiator could have removed 12c, this is impossible, there, at best, 2 degrees is somehow still hard to believe, but not 12c. Can you equate an open case and a closed one? My family on dropsy at 1500 rpm are spinning at full load for a percentage, they are not particularly audible, not stressful, at least quieter than on noctui d15. In front there is 200 by 700 rpm and the same from the side + for blowing from the back 140 or 120 at 1200 rpm, Well, the SVO itself turns out to blow out excess heat from the case too. In your case, half the length of the case on top is occupied by some buttons and other bullshit, you probably have a 280mm ceiling radiator, even a 420mm radiator with 3 sections miraculously fit in and it is 390mm open and nothing blocks it. Don't even bother with the card, the settings are native valves, I had 1080 gigs with 3 small coolers like yours, they had a maximum rotational speed of 3800 rpm, kept the temperature up to 65 c and spun at 3000-3200, against the background of the game there is sound from the speakers they jammed and did not bother. Try even promonitor through msi ab and aida64 if you set the slider to 100% what the rotation speed will be. even a 420mm radiator with 3 sections miraculously fit in and it is 390mm open and nothing is blocking it. Don't even bother with the card, the settings are native valves, I had 1080 gigs with 3 small coolers like yours, they had a maximum rotational speed of 3800 rpm, kept the temperature up to 65 c and spun at 3000-3200, against the background of the game there is sound from the speakers they jammed and did not bother. Try even promonitor through msi ab and aida64 if you set the slider to 100% what the rotation speed will be. even a 420mm radiator with 3 sections miraculously fit in and it is 390mm open and nothing is blocking it. Don't even bother with the card, the settings are native valves, I had 1080 gigs with 3 small coolers like yours, they had a maximum rotational speed of 3800 rpm, kept the temperature up to 65 c and spun at 3000-3200, against the background of the game there is sound from the speakers they jammed and did not bother. Try even promonitor through msi ab and aida64 if you set the slider to 100% what the rotation speed will be. against the background of the game, the sound from the speakers drowned them out and did not bother them. Try even promonitor through msi ab and aida64 if you set the slider to 100% what the rotation speed will be. against the background of the game, the sound from the speakers drowned them out and did not bother them. Try even promonitor through msi ab and aida64 if you set the slider to 100% what the rotation speed will be.
You want to make a collective farm with a map like this, probably, so it's better to take industrial ones from noctua for 3000 rpm, there will be a thing, only you won't be able to keep such frequencies anyway

Palych Rokov
Now I would like to deal with the temperatures of the operative and the power supply, and find out how much the temperature is there. I talked to Denis, he says that the Odyssey gaskets are superbly helping to bring down the temperature on the video memory chips. I saw these on Ali Express. They cost up to two thousand. As for the core of the card, one person suggested to me to completely disassemble the card and use liquid metal from Grizzly. He at 3090 in load during two hours of stress test got a temperature of 36C !!! In games, he has a temperature of 26C on the map !!!! He tells me these numbers, and I was already salivating from this) If he doesn’t lie and shows proofs, then without even thinking I’ll buy liquid metal. And I use it as a small droplet on the core itself. This must be done very carefully so that nothing spills on the textolite. I won't take anything for a week, no vodka, no beer, so that your hands do not shake before the sacred operation! Bliiiin, 26C on the map in games !!!! And if I still put all three screws from the Iceberg on the radiator there, that is, I will fasten them through the clamps, God there will be a refrigerator !!! After that, I will disperse the card into the trash, so that even the Bag4 tank will be jealous of such indicators! This will be the world exit of the Myshivurian race. A sacred Jew from Grizzly costs about ten stakes, like dropsy per cent. But, if the proofs are valid, I will not regret even a half for the sake of this! 26C on the map in games, Karl !!!!!! Eh, his great mother Pekabiria, where the kids are doing such damn experiments !!!! This will be the world exit of the Myshivurian race. A sacred Jew from Grizzly costs about ten stakes, like dropsy per cent. But, if the proofs are valid, I will not regret even a half for the sake of this! 26C on the map in games, Karl !!!!!! Eh, his great mother Pekabiria, where the kids are doing such damn experiments !!!! This will be the world exit of the Myshivurian race. A sacred Jew from Grizzly costs about ten stakes, like dropsy per cent. But, if the proofs are valid, I will not regret even a half for the sake of this! 26C on the map in games, Karl !!!!!! Eh, his great mother Pekabiria, where the kids are doing such damn experiments !!!!

Gott Mit Uns wrote:
Comp, yes it is on the table
Correct location of the computer - floor, unless of course the floor is unheated)

Marsj
I like it when he stands in front of my eyes on the right)

Gott Mit Uns wrote:
He got a temperature of 36C at 3090 under load during two hours of stress test !!! In games, he has a temperature of 26C on the map !!!! He tells me these numbers, and I was already salivating from this)
To say not to roll bags, liquid metal can most likely stick tightly to your radiator, such low temperatures will not give you anything especially, because even if you unleash your relatives, you are sure you will have a huge supply up to the temperature
limit.I think you'd better take industrial valves from noctua then, they blow crazy, icebergs didn't even stand nearby

Gott Mit Uns wrote:
After that, I will disperse the card into the trash, so that even the Bag4 tank will be jealous of such indicators! This will be the world exit of the Myshivurian race. A sacred Jew from Grizzly costs about ten stakes, like dropsy per cent. But, if the proofs are valid, I will not regret even a half for the sake of this! 26C on the map in games, Karl !!!!!! Eh, his great mother Pekabiria, where the kids are doing such damn experiments !!!!
This will not affect overclocking, your card will still be throttled due to the emphasis on the power limit, you need to sew a custom Beavis, only it will burn out for you, for this there should be a top-end element base with a bunch of circuits and power phases, and your card is mediocre from the gigabyte line. If you had at least aorus, then maybe. In general, the maximum overclocked into the trash and the full drain is about 10 fps, do not go into the card, do not deprive it of the guarantee.

Gott Mit Uns wrote:
I like it when he stands in front of my eyes on the right)
Then put it on wheels or footboards so that there is an air intake from below, otherwise you stupidly do not have it.

Palych Rokov
You can then put on large ledges, for example, grind them all four legs out of wood. About half a meter long. A sort of logs.