What to do with low FPS (Just Cause 3)
Share the info if anyone knows how to increase FPS. It sags wildly, I know that almost everyone has this problem, but maybe someone found some ways?PS no need to start arguing about "The game is not interesting, the plot is bad, etc." We all know that no game comes out without subsidence and bugs!
ClownPOPO
try to set the texture quality parameter to a minimum, Rico will be a little blurry, but I didn't notice any more difference, there are almost no subsidence
Kol55
SashaF_50
I have updated the drivers and the system requirements are correct , my GTX 760 is the only thing
ClownPOPO
Well then, I don’t know, maybe the card doesn’t fit, but on the other hand, everything is almost suitable for you except the card. Well then wait for the patches.
FPS falls the wrong word, from 60 to 1 probably lags and freezes terribly at 960 nvidia. It's a shame if it were just powerful and the fps was about 30. or even 60 or more and freezes in battles as if I had a three-year-old card. how to solve this? well, apparently nothing other than patches, but they are in no hurry to release them
If you have a system with more than 8GB of RAM, then remove the swap file and the friezes will disappear. (I myself was at first tormented with friezes, but how I set the swap to a minimum (16MB), since then I haven't noticed a single frieze.)
Catherp1e
not well, that's too much)) we should probably set one more bar for 8 GB, since the assassin syndicate also eats a lot of RAM
You can also read the guide here. this https://vk.com/lanskoygames?w=page-89848447_50688425 or on the stopgame was old.
Before and after the release of the patch. launched - Friezes. With any settings from 60 to 1 fps. NVidiaExperience driver 344.75
i5 4590
gtx770 (2gb)
8gb RAM
did not reach the next meeting with the rebels