overclocking memory 10400f on ASrock b560m pro4
Hello everyone, I ran into such a problem that I can’t drive RAM on Intel, before that there was an AMD platform and there I didn’t experience any difficulties.percent: 10400f
mother: ASrock b560m pro4
RAM: A-Data XPG SPECTRIX D50 RGB [AX4U32008G16A-DT50]
on XMP 3200 starts, but as soon as you start to drive with your hands, say, 3600 18 20 20 38 1.35-1.4v crashes into a blue screen.
on AMD there was a mother from Gigabyte and in the bios of the asroka I swim 2 times in my life.
Moreover, when you manually set the XMP values, it also does not start.
Three Days
Start small wherever you go. At least 3400.
don't forget to look at the VCC IO / SA voltage, it lifts them dangerously in auto mode.
Blue screen due to incorrectly set timings.
01001000 01101001
VCC IO / SA on AMD, I didn’t do this, but I already looked at the guides, they talked about io / sa voltage
for some reason, with XMP 3200, the reading speed in the Aida test is only 37 GB sec, should it be so on Intel?
Three Days
You need to put the RAM in the second and fourth slots. Speed, not enough. For 3000 40+. You can look at the 10400F in the reviews.
Three Days
Try a modest 3400 to start with. How much did you keep on AMD? Are the bios updates up to date?
01001000 01101001
On Ruzen 3600 it was 3466 at 16 18 18 36 w1 1.35v. Bios is last
Three Days
Memory chips are tight. Just rubbish. Don't beat 3600. You have factory 16-20-20.
Do it small. Your blue is due to low timings. 18-20 is not enough, 18-22 to lead, I think, and not 3600, but 3400 / 3466 for a start. Here I don't know anymore. Everything needs to be checked.
The memory is terrible, I don’t know how it was on your Ryzen 16-18, and even CR1.
3200 set the timings underestimated and it’s not corn on the way, the frequency didn’t hit Intel, especially 10400. All timings are at a minimum and on the way. Or continue to suffer with frequency and minimal results.
01001000 01101001
Ruzen had ballistics
Crucial Ballistix Sport LT BLS8G4D30AESBK
Three Days
Well, here's your answer. In vain poured the balls. They're way bigger than this garbage. So they took more.
I had no problems with any good set of memory on Intel. Samsungs flew for 3800, balls took 4000 without question, and G.Skill 3600C16 set 3800. Both speeds and timings. So, return where you got it or sell it and change it.
I also easily took 3466 for ryzens 3600 samsungs. Normal memory is needed.
And overclocking certainly gives a profit. From 3600 / 3800. In games at minimum wages and 0.1% and 1%. Average FPS, so you have to drive, that's why he showed results better than 3600 ryzen. And so, the awl for soap changed something.
Three Days
, he raises them automatically. try it, don't overdo it. and so I will name the reason
01001000 01101001 the
reading is too low, why is that?
3600 1.4v 19 23 23 43 read speed
39203 Upd: took 4GHz at the same timings
PPC, I would fucking change the Ryazan 3600 to 1040f ... naheraaa? Awl for soap. So is Asrok's mother. I messed around with this company. Asus for intel. Msai. Gigabyte, but not Asrok. exactly. Current to drain. Also, the chipset is not Z but B ((
Three Days
3600 on 19x? And what were you waiting for? I have balls 3600 for 16, 4000 for 17s. Memory is rubbish.
Go through the secondaries, tritics. And the voltages, I remind you, do not exceed. And what about speeds at 4000? CR1/2? Are your 4GHz stable? There are no departures, did you test the memory?
Ashrock in any performance of deshman. Gigi has at least a suitable feeder, Ashrok has only one more or less model - taichi (+rare exceptions), it is terrible in everything, including the bios and restrictions, which are not in the same MSI. MSI in the budget version is good, there is a balance, without unnecessary drawn mosfets. Pulls and older models of processors. B560M PRO VDH should have been taken.
Three Days
Do you have other timings in your car? Their fees are likely to skyrocket.
Just for example, an even more deshmanic Goodram Iridium kit [IR-X3000D464L16S/16GDC] on nanya chips, but overclocked to the maximum for this frequency
. It can easily go above 3400, but now it limits the memory controller on the processor.
Three Days
yeah, overclocking the same gives an increase. It's true. And there and so restrictions and frequencies low.