The transition of the molex-fan 4-pin
Good afternoon. I have this problem. Have a fan with molex four contacts and lighting. I suspect that this is either a full 4-pin fan with adjustable speed through the mother or a separate power supply for backlight. I want to make it connector 4-pin for connection to the mother and the subsequent automatic adjustment of the speed, so as to spin himself does not want. Question: will the whole thing work?Fan: https://www.ebay.com/itm/NEW-ZALMAN-ZM-RFD120-SPECTRUM-RGB-120MM-FAN-SYSTEM-FAN-Freeship-Tracking-/293027838855
muom
The illumination does not have a separate connector, it is on by default in the General channel. It's a Molex that has both 5 W and 12 W.
Generally, you need a rpm sensor to change the speed of the cooler (as far as I know), otherwise the adjustment will be implemented through voltage (DC - in the same way on the motherboard).
Usually, the led lights is 12W, in this case, it 5 W:
Spoiler
So, it will have to throw a separate wire and the fan speed will be regulated through the voltage.
It might be better to reconsider its decision in favor of this:
Спойлерhttps://ru.aliexpress.com/item/Aigo-DR12-3-PC-RGB/32861002429.html?spm=a2g0v.search0104.3.44.33113c95PgAy1b&ws_ab_test=searchweb0_0%2Csearchweb201602_5_10065_10068_319_317_10696_453_10084_454_10083_10618_10307_10301_537_536_10902_10059_10884_10889_10887_321_322_10915_10103_10914_10911_10910%2Csearchweb201603_6%2CppcSwitch_0&algo_pvid=95010cf6-84f5-4e4d-87e9-71b2a87c2067&algo_expid=95010cf6-84f5-4e4d-87e9-71b2a87c2067-6
Ali, the protection buyer, cheaper reviews and reviews.
VOVAN WOLF
Hmm. That is, if I take the remake with malexa 4-pin, it will not work?
I like this backlight is not needed, he accidentally got with the case. But due to the fact that the valve is new and quiet a pity not to use it. Just wanted to connect her to the mother that she there it itself is regulated. Alas.
muom
muom wrote:
Hmm. That is, if I take the remake with malexa 4-pin, it will not work?
Will work only 5W wire this light. And adjustment of fan speed by means of voltage.
muom wrote:
I like this lighting does not need
Just crush, close and forget.
muom wrote:
to connect her to the mother that she there it itself is regulated.
So be it, customize a graph using the voltage. Most importantly, know the Pinout. There will be two wires ( + / - ).
VOVAN WOLF
Here is a Pinout problem. You'll need to know. The valve wires are all black, do not understand what is where.
muom
On malese all can be easily dismantled:
Spoiler
Spoiler
Still Google. Understand the place, not to be confused.