FX8350 based PC
Hey guys. I saved some money and now I'm going to buy a more or less budget version of a computer based on the FX8350 - I already bought for 10,000 rubles and a video card Radeon R9 270X 4gb And there are many questions.I have 17 thousand left. I want to overclock the percentage to 4.5-4.7, which is better than cheap dropsy like Cooler Master Seidon 120V VER.2 or regular air, if air - then which one?
Which mother is better suited, within 7 thousand?
Operative was taken by Kingston HX316C10F*/
8gb
it would be better if he took the FX8300, he would also disperse it, you will find a normal mother for 7k xs, it would be better to take 280 for cheap dallars
try to find him, find a mother, in short, an arneal for normal money
p / s although I looked at the norms, there are a lot of them all over Russia
it is believed that the 8300 will overclock exactly the same to 5 GHz as the 9xxx coolest shopping mall architecture is one and the multiplier is unlocked. but most likely, the processors of the younger model simply hide the possession of successful chips, the extreme overclocking of which is difficult to implement.
as MP will go.
ASUS M5A99FX PRO R2.0
but it costs like more than 7k or so. the rest have a restriction on power supply, and at 4.7 it is already 200 + watts of the declared heat dissipation and, therefore, a similar requirement for power supply. or the stone must be lucky.
air for example Thermalright SilverArrow IB-E should cope and not fit into every case. minimum arctic cutter a-30.
if the memory is 1 handkerchief, then it’s better to buy a lollipop for the remaining money, here.
I would take 8320, he will chase with a bang, a mother with a 990 chip. and there was enough for 290 vidyahubs, I don’t advise you to bother with dropsy, it’s better to choke the tower from the zalman
a good option. you can also hang 120k on his face or (140k if it fits) hang and everything is ok)))
Treca01
Why is it so expensive, Zalman CNPS10X Performa is enough and you can have such an ASUS M5A99X EVO R2.0 motherboard and if you didn’t take a video card, take R9 280
Zalman CNPS10X Performa can't cope with overclocking, but 14 is just the thing (since I changed 10 to 14 myself), I advise you to pay attention to the gigabyte 990fxa-ud3
Treca01
You would have climbed into the forum of another site that specializes in the selection of sets. Why take AMD, why overclock it and for this take a tower / dropsy for 3K? It would be possible to take a simple cooler and intel for the same money ... well, it's up to you to decide, so be it. Damn... how stupid to say what not to do when it's already done. OK. A GOOD mother costs 5-6K (what smart guys offer for 7K?). This overclocking keeps my motherboard for 3.5K, you can take a newer model on a 990 chip and meet 6K. At the expense of dropsy or towers for 3K. I WANT to hear at least ONE person who will tell me that he put a dropsy or a cooler for 3K because something did not cool him there? I think out of 7 billion people I will not meet such people. If the computer at 100% load will work 24/7, then you need a budget of 50 times more, and you collect JUST a computer, for games and contact. deepcool gammaxx 300 costs about 1.1K and will cool 83 ** to 50 degrees. Quiet, large propellers, good cooling and bearings. The first Gigabyte GA-990XA-UD3 6K motherboard that came across has 7.1 sound (you all have a system of 7 speakers and 1 subwoofer in the room, don't you?), 6 SATA3 ports (you have 6 SSD drives, I guess ), as well as 10 usb connectors. More than a normal motherboard and the voltage for the 83 ** series keeps the norms, since the system. power honest 8pin. Body of your choice. More than a normal motherboard and the voltage for the 83 ** series keeps the norms, since the system. power honest 8pin. Body of your choice. More than a normal motherboard and the voltage for the 83 ** series keeps the norms, since the system. power honest 8pin. Body of your choice.
Negih
Tell me how will fx 8350 in overclocking 4.5-4.7 ghz cool deepcool gammaxx 300 despite the fact that tpd will be 220 watts?
I advised a person to take it on a 990 chip, just Gigabyte GA-990XA-UD3 with a margin, plus it has two pci working in x16 mode, and suddenly the second video will turn up on occasion ....
dik120
Since when did Zalman CNPS10X Performa not cope, if my Deepcool Ice Blade Pro did, then zalman and even more so, personally checked
nah to drive him? I have fx8350 and everything pulls without tension, vidyashka only doesn’t take out something, but in general it’s normal, I took it for 6 oblique ones! kapets prices now!