Mardriva 2007
Tell me how to set up GPRS in this system? Phone model sony ericsson j300iCD disc? If the equipment is not defined, then by simple means it is difficult.
Load (if it got on the CD-image) the ipaq module with mobile IDs (lsusb will show), everything is clear from root. And then kppp shamanize and mustache)))
Yes, in theory, everything was determined there :) Truly kppp =) The current one important point was missed by the author: does he cling to the mobile by the cord or by bluetooth? There is, you know, a difference... Cable model here.
It is connected via a USB KQ-U8A cable that is seen by Mandriva2007, but is defined as an unknown device ... how can I configure this whole thing so that I can access the Internet?
I tested with commands, here is what happened:
Command results:
Command # tail -f /var/log/messages without cable:
Nov 17 18:01:03 localhost msec: changed mode of /var/log/gdm/:0.log.1 from 644 to 640
Nov 17 18:01:03 localhost msec: changed mode of /var/log/security/suid_root.today from 644 to 640
Nov 17 18:01:03 localhost msec: changed mode of /var/log/rpmpkgs from 644 to 640
Nov 17 18:01:03 localhost msec: changed group of /var/log/rpmpkgs from root to adm
Nov 17 18:01:04 localhost msec: changed mode of /var/log/security/writable.today from 644 to 640
Nov 17 18:01:04 localhost msec: changed mode of /var/log/security/suid_md5.today from 644 to 640
Nov 17 18:01:04 localhost msec: changed mode of /var/log/Xorg.0.log.old from 644 to 640
Nov 17 18:01:04 localhost msec: changed group of /var/log/Xorg.0 .log.old from root to adm
Nov 17 18:01:04 localhost msec: changed mode of /var/log/gdm/:0.log from 644 to 640
Nov 17 18:02:17 localhost kernel: usb 2-2 : USB disconnect, address 2
Command # tail -f /var/log/messages after connecting cable with phone:
Nov 17 18:01:03 localhost msec: changed group of /var/log/rpmpkgs from root to adm
Nov 17 18: 01:04 localhost msec: changed mode of /var/log/security/writable.today from 644 to 640
Nov 17 18:01:04 localhost msec: changed mode of /var/log/security/suid_md5.today from 644 to 640
Nov 17 18:01:04 localhost msec: changed mode of /var/log/Xorg.0.log.old from 644 to 640
Nov 17 18:01:04 localhost msec: changed group of /var/log/Xorg.0 .log.old from root to adm
Nov 17 18:01:04 localhost msec: changed mode of /var/log/gdm/:0.log from 644 to 640
Nov 17 18:02:17 localhost kernel: usb 2-2 : USB disconnect, address 2
Nov 17 18:04:53 localhost kernel: usb 2-2: new full speed USB device using uhci_hcd and address 3
Nov 17 18:04:53 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice
Nov 17 18:04:53 localhost kernel: cp2101: `/dev/usb/ttvACM0' invalid for parameter `debug'
Command # lsusb:
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000: 0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 003: ID 10ab:10c5 USI Co., Ltd Sony-Ericsson / Samsung DataCable
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 04a9:2220 Canon, Inc.
Bus 001 Device 001: ID 0000:0000
And here is what is in the USB cable equipment settings panel:
Identification
Manufacturer: USI Co., Ltd
Description: Sony-Ericsson datacable
Media class: ?
Connection
Bus: USB
PCI bus #: 2
PCI device #: 3
Manufacturer ID: 0x10ab Device
ID: 0x10c5
Sub Manufacturer ID: 0x0000 Sub device
ID: 0x0000
Diff. Module: unknown
In kppp, I tried to put /dev/usb/ttvACM0 in the modem properties - zero effect...
Well done! It remains only to find at least some module to pick it up. Google ask! And from me to you magarych - with this command I cling my communicator as a modem (your IDs are already taken into account). Maybe you'll get lucky...
# rmmod ipaq; modprobe ipaq vendor=10ab product=10c5
give root two or more times until it stops cursing)))....and then kppp and a tambourine, a tambourine...
Guys, if someone has come across this, please help (if you know how to fix it). In general, when I start the Changed game and go to the save (even if I just downloaded the game), the save pops up in the next room after the camera when I started a new game or spawned from that save. Then if I exit the game, then all my memories are erased, and only the save at the beginning of the game remains, and when I close it, a sign pops up * Do you want to save the files that have now been created? * .When I pressed *Yes*, then I got an error, I immediately say I even went into these saves myself, launched and the error also popped up, I don’t know how to fix this bug. I also launched on a pirate, and I even jumped game. Still this error.
I ask you to help me, tell me what to enter .. just ask me to help, I want to enjoy the game.