What is the best computer for gaming? To keep 40-50fps stable. (The Witcher 3: Wild Hunt)
With my Intel Core i3 - 3245, AMD Radeon HD 7700 series video card (I forgot the model =( ) and 4 GB of DDR 3 RAM, it’s not very comfortable to play even at settings close to the minimum, jamming, twitching, the camera barely turns, grass It loads on the go, well, just somehow not comme il faut.I decided to assemble a system unit.Or is it possible to replace something with me to make it comfortable to play?I play on i7 3930 + HD 7990, at an average of 60 fps, it’s worth running into some village, textures are loading and the fps drops by 5-7, it seems to be not critical, well, how annoying this one is (, after again 60 fps, and so always(
depending on what settings I intend to play, for example, on ultra, with anti-aliasing and hair, even my bucket (see profile) manages to sag in some villages up to 40fps. Well, if on medium-high, i5, 8GB ddr3, gtx680 2GB should be enough.
zhenec4
And you manually set the lock fps to 50 instead of 60 in the config. There is practically no difference, but the game will go much smoother.
23hudo
Can't tell you exactly where to find it. I only found a lock at 30 fps in cut scenes
I'll throw off my entire system unit a little later, evaluate it, and you will definitely tell me what to add, what to remove))
RedBlack23
230V block
And it makes sense to lay out the voltage of the power supply, but it cannot be determined from it whether the PSU will pull the system. We must at least look at the specific one. power in W (watts)
RedBlack23
Well, in theory, this should be indicated on the block itself. There they also indicate the power along the lines, the model itself, the manufacturer and other information.
1. It depends on the settings and screen resolution
2. I saw on my own how 60 fps is stable at high, and at least 44 at low shadows and medium grass (again, everything depends on the resolution).
config in profile.
IOne86
then yes, but you can put, for example, i5-3570K (and overclock it),
The author did not indicate the motherboard
zhenec4 along the path C:UsersUSERNAMEDocumentsThe Witcher 3 there will be a user.settings file - open it with notepad, there will be lines near the end, if there is no line you need - write it yourself, only along with the title, then save the changes and in properties you specify "read-only"
".....
[Engine]
LimitFPS=60 - here is the parameter you need, you can set as many as you like
[Rendering/SpeedTree]
......"
In fact, for the witcher, it is enough just to change the video card, and it will be comfortable to play, even if the RAM is 4 gigabytes and the processor is old. I have 4 gigs of RAM, I-3 530 and a new 970 graphics card, about 47 frames at maximum quality in 1920 by 1080 resolution, with hair included.
23hudo
thanks, I tried to overclock the video card here, it seems to be stable at 60 fps at high speeds)
config in the profile, lock on 60 everything is ok! hairworks for all inclusive, all on a high, having run around looking at the high and ultra, I didn’t really see the difference.
RedBlack23
AMD FX-8320, gigabyte r9 280x, 8gb ram.
High, with hairworks disabled - 50-60 fps.
I would like to play at high without Hairworks ... Is it really worth changing only the video card? That is, the processor will pull it like that?)