In many games 90 + 115 fps, but the picture is not smooth
ComputerRyzen 5 5600x
2060 msi oc
16 gb CL 15 3800
Msi mag b550m mortar
I play GTA 5, the limit is 131 fps, but when it drops below 115, the picture starts tearing and not smooth. Nothing overheats, does not hang for a few seconds. When I make a video, everything is smooth and beautiful, but in the game itself, some kind of nonsense
the processor does not take out, so when the video is written, it is written not 100 fps, but a maximum of 60 and the mesh mesh is
finally not very strange that at 2060 so many fps you can raise the rafi settings to 20-30 fps and the processor will not shut up. v-sung is even better to include always and everywhere.
Judging by the "picture break", you need to turn on vertical sync. The systems are good for gta 5. Check also the temperature of the processor and video card. Maybe due to overheating, the frequencies are thrown off, respectively, and microfreezes begin.
Monitor how many hertz? If 144 and above, it will be so, v sync g sync turn on, if any.
Redrumsky
The temperature of the processor and video card is low, 56 percent, vidyuha 49. Windows fully optimized for games + overclocking of processor and memory
MunchkiN 616
5600X won't export GTA5? Neighing. Probably you need i7 or i9, and preferably the latest generation? :)
Evil in the flash
, modern and not very processors have such a problem that when they go into full load by stream or in general by tiers, they start some kind of friezes even at high programmatically measured FPS. and the concept of floating does not pull here. probably the same will happen at 300-500 fps.
I personally encountered Tim when I put relatively strong cards on a rather weak processor and did not get a stable gameplay. but I got at the fps lock what the processor can produce. in part, this could be bypassed by specific overclocking of the processor, and some believe that this can be bypassed by installing a particularly fast memory, but most likely this is something that happens when dividing into streams of jumping dynamic frequencies.
so yeah it's better to have i9 and lok on cinematic fps peck-pek
Evil in the flash
Ignore him, he's the local fool. How can you take seriously a person who doesn’t even know how to write correctly, and punctuation marks are an incomprehensible science for him.
Slipnot6
I don't understand at all, and why it is, I set the lock to 80 and it gets worse. When 130+ everything is fine, without twitching and smoothly
6654346677
Try this:
turn off the vertical sync in the game itself, and in the nvidia panel add the gtaV profile and in the parameter below, which is called "vertical sync", set the value to "fast".
Slipnot6 The
mouse becomes smooth and very unusual. If I buy a new monitor with freesync support and my video card is from nvidia, will it not work?
6654346677
Not a fact, there somehow with the help of cunning manipulations it was possible to make the freesync work on nvidia, if this feature had not yet been covered. Google it, and then think about whether you need it or not.
6654346677 First , install
MSI Afterburner, turn on monitoring, specify the output of temperatures, frequencies and load of the video card with the processor, graphics of time and frame rate, and take screenshots of the game with the output information when the problem occurs.