voltage
img.playground.ru/images/1/6/Snimok-23.PNG" width="640" height="603.42857142857" /> why all programs show where 12 volts should be - 15 volts and where 5 volts is no more 3.5 volts under load, while in the bios everything drop by drop will show 12 - 12.098, 5 - 5 and the system has never failed at any load. just wondering.
-Sergey Viktorovich-
can you somehow lower the voltage by 12? and increase there.
God Nasimka,
if the voltages that are on the screen corresponded to reality, then your computer would not work)
while in the BIOS everything will show drop by drop 12 - 12.098, 5 - 5 and the system has never failed under any load
, this is the most important thing . So kill it)
-Sergey Viktorovich- The
volt meter shows directly 14.8 volts on the +12 line, also specially measured) and on the +5 channel it is stable 3.1 but at the same time the PC works stably under any load, so the softmod was not much mistaken, I just don’t understand what the hell, on what kind of voltage can affect? recently burned down 500 GB railway, can it burn out from this? I put 1000 GB of Toshiba working so far) what do these voltages affect?
God Nasimke
It doesn't happen. I won’t believe it until I see the proofs in the form of a photo of the circuit board and the connected probes.