Bought Ryzen 3900x...

STANDS of Milivoje
All temperatures are normal.
And this frame not look. Enough to see that he carries about 4 to

potter790 wrote:
In the Subway there 4K a resolution. But Andromeda did not show, he has a 4K monitor, no.
Yes, everything is there. Look carefully. Just need the key to the great secret of the higher world)))))

Lol, again, Locke with his i5 th? man, you're really noob in hardware. First idolized core 2 duo, now i5 7600K, throw your computer in the garbage, or envious silence the author)))

N0NAKK
Hi. You have a motherboard like mine) To how dispersed your processor and what voltage????

potter790
You boil, if not already boiled.
The AMD one temperature sensor for all cores, so the same rate regardless of load or naprugi.Also, the BIOS can protection enable: when reaching the selected temperature threshold Pitch will turn off

STANDS of Milivoje
Hi, unfortunately I have non-K percent, so that type driven only on the bus to 4400 all cores, the voltage decreased to 1.16

STANDS of Milivoje
potter790
Please:
Spoiler

John14b
KillKammbest
potter790
For you personally produced underwriting up To 1.1 v
Spoiler

Aloska

And why would I want to throw. I did not say anything. I wrote that at 4.2 ghz without reducing the frequency at 1.100 v on all cores in the peak load is impossible. Why am I talking about voltage. I had ryzen 1700 so he has the maximum voltage on a permanent basis is possible up to 1.4 v. AMD officially recommends that you do not exceed 1.350 v I used for 4ghz at 1.375-1.385 v on all cores and load percents throws set 1.406-1.425 V in this mode it worked for over a year then I sold it). This voltage for all cores to use can be provided very, very good cooling so the temperature did not go beyond 70-80градусов. Over 80 degrees when the voltage over 1.4 degradation is provided. Max I saw 65градусов in BF1. In other games not above 55) and some even less. Understood that I had other technical process other frequencies on 14нм. Then came another generation ryzen 2000 limit voltages remained the same and it seems even smaller with the reduction of technical process. Decreased the process до12нм. The new rulers 7nm. Why am I writing this - the process is 7nm and simple horse voltage. Bothers me that when you have the system idle for some core processor Bostic to 4.6 ghz and the voltage up to 1.47 v seems that in idle it in the load screen too, it says. When you open a program or browser then it is clear that what is happening is the load percent to ustitsa and throws voltage. In theory, this voltage valid if the percent of runs at this frequency for several cores 1-2, but damn that's almost 1.5 V . Although the load you have with 12 cores voltage 1.087 v. I am not going to assert something as this processor I have on hand I could be wrong from the words I do not refuse. While it is not clear what the recommended and maximum voltage for the third generation. On overah information. They are overclocked from the factory already. Is there a website silicone loterry so they sell selected processor 3900x at 4.2 ghz it runs at 1.250 V. Read the review of 3d news and overo in their Prime, worked at 4ghz at 1.2 v . In simple 1.296 v when 4.116 mhz. but frequency is less and also the load up to 1.2v. In games naturally load less voltage and less possible. Turns out at 1.4 v to get 5 ghz) you Have with more frequency 4.150 mhz in games for up to 1.100 v in principle this is possible but it looks like something too cool in this heat, apparently 7nm does the job, but here's your screenshot your cpu z shows the speed of 4.2 ghz in a Simple and naprugu 1.464 here is not clear to me when the games works 1.087 v on the cores. here chudit soft or is everything in the car and the motherboard in idle lifts the voltage. In CFC, you have to load 1.340 v при4.100mhz and what to believe in Hz. HW info should look.On the forum there are complaints about horse in easy voltage, and should get patched.

John14b
John14b wrote:
3900x at 4.2 ghz it runs at 1.250 V.
I also it took such frequency with the voltage and completes the RealBench program.

John14b wrote:
but here's your screenshot your cpu z shows the speed of 4.2 ghz in a Simple and naprugu 1.464
I've zafiksirovan frequency as
John14b wrote:
website silicone loterry
See:

I'll continue to sit to wait for new BIOS, maybe that will fix fake.

John14b
Yeah you're right, won the lottery.
But you can get 4.3 GHz at 1.350 voltage and higher
But I have a feeling the cooler I get

John14b wrote:
On the forum there are complaints about horse in easy voltage, and should get patched.
Aloska wrote:
I'll continue to sit to wait for new BIOS, maybe that will fix fake.
Direct deja vu.. three years ago. ))))

They are from the factory already overclocked in the trash like so such as temperature and voltage.

Aloska
Cache in new razanah just bomb enough that the volume at times more than Intel so its speed is much higher. In games I do not know whether with the expectation of such a large cache, but the programs he so tears and Intel in the dust.

Aloska
And how is it that the dissipation of 105W,but percent thus heated to 77°?My old Panama a TDP of 125W and it is heated 58-60°.Why TDP is lower and the temperature higher?
My Reisen TDP 65W,but the game de, as the old man with the hair Dryer:
Spoiler

[Denis]
The die area of many small transistors - the process. A small surface for heat dissipation. Even a top of the cooling system is not much help. Just can't take the heat from the crystal, even the solder and the molten metal there's much you can do.
Only downvolt to the optimum temperature regimes.
Talking with the new microcode in the BIOS the situation can improve but it's on my rumors.

[Denis]
It depends on the voltage.
The lower the voltage, the lower the temperature.

Aloska
On my AM2+ included prfil +10% to performance on the bus.There stress no higher than Riesen.

Ryazancev
I knew it.That is, the lower the TDP, the less opportunity it dissipate

[Denis]
No, the smaller the area, the worse the heat dissipation. I.e. under the same TDP (amount of heat) loses the smallest area.
Roughly the same amount of water (1 liter) evaporates faster from the floor (when poured), but not from the bottle without the cork.

[Denis]
Watch the video that I threw undervolting, where 1.1 v.
There the processor is too warm to 55-60 degrees.