Tuchodi screen during boot
Hi all, again I came back to this forum)Well, not about this.
So that's my problem:
Assembled a computer from old parts left everything except the CPU, GP, OP, block 350 watt if that
Stuck to 1650 mini itx GTX oc from Gigabyte
First start the PC, everything is OK, rolls Windows, everything works, but until you start to install the driver for your video card after installation, and sometimes during it, just goes out the screen when you reboot, it comes to start Windows and goes out again
I went into safe mode, everything is OK, demolition wood, clean the computer using ddu, put an old driver, it does not give any results, tried several versions of Windows, different Assembly that wines 7 10
Thought the fact that I use an adapter from display port to vga, but when connected to the TV via HDMI also gave no results...
Hispanice guys, hope you
Build:
CPU FX-8350
RAM Kingston hyper x 2x8gb
Motherboard ASRock n68c-gs fx
The power supply is Accord acc-350w-12
Monitor Acer al1716
LOL_SOFT
in the specifications of the graphics card recommended PSU at 300W , you have a percent eats 120W + video 75 watts and there are only 216 that is most likely the case in the block , just ask the friends and check.
LOL_SOFT wrote:
Then another question, how much?
Written https://www.dns-shop.ru/product/3e5d4bbf64a91b80/videokarta-gigabyte-geforce-gtx-1650-mini-itx-oc-gv-n1650ixoc-4gd/characteristics/
350 should be enough. Maybe Igor where it should look, but for a desktop grab needs differently. The problem is not the PSU.
In General, when installing wood is often happens that the screen fades out, but back then it turns on. Drinking a screenshot of GPU-Z.
Lodurr
Left for the night, hell, no, it is not included, and sometimes that PC in 20 minutes just shuts down
LOL_SOFT
a new video card? An obvious problem with the chip , without drivers, you have everything working fine? And once you put the flights out of loading screen? In BSOD does not fall out?
Wait, you have a graphics card works in mode pci 1.1 x16 am3 although it's kind of like the truth is on the 970 chipset (the NVIDIA for don't know) where it's supposed to run at x16 2.0 ....or connector is not delivered (pull it out and move must be pci 2.0) or that the mother drives....