gtx550ti and gtx650 you here. (Dark Souls 3)
In General, I have stable 30 fps and smoothness on gtx 650 1gb. Percents i3-2125 and 8gb of ram.1600x900 on all low and off except for smoothing.
Have at least 30 fps in the beginning, the fire temple was just a wild friezes and fps to 10-15 if you look in the direction of the blacksmith in the fire temple now 30ка stable.
My response:
Put 10ку(important), latest drivers in the NVIDIA settings for the DS turned Vsync to adaptive(half the frequency), in the global settings: texture filter - high performance and dnodisplay performance.
For the 550ti and indeed the 500 series (maybe 400)
Hammered into search nvidia 314.22, swing for 7 (it does not matter if you have 10kA).
Having removed the driver prog DDU in safe mode (Display Driver Uninstaller Google searching).
Rolls 314.22, remove the checkmark from Nvidia driver updates.
Repeat the procedure in the nvidia panel global settings. (Vsync optional)
In the end we get 20-50 fps vs 10-30. If you put Vsync will be less frisii but these drawdowns to 20 I was only in the fire temple, then it was always more than 30.
Paul Tambov
Thank you! Helped, only on 314.22 SLI is not working, I have 2 GTX580
Going to visit the new wood with SLI and in the nvidia settings panel.
it works in principle on the 500 series and partly on the 600.in principle, nothing important there, except 314.22 firewood, and here the vin10 and the left bend?
remove the firewood, put the old and rejoice fps-in, no extra movements.
YagamiRain
Pro driver
it works on 500 and 400 series, 600 no effect.
about DDU I wrote, because this prog is easy in 1 click to COMPLETELY remove the graphics driver.
In principle, you can simply delete through the Manager. I only advised as safer.
Paul Tambov
seriously?therefore, in the next topic the guy with the GT630 is also helped?
safer?this is a very controversial statement, it is safer to remove by hand than to put the left software.
On 450gts is not working with the latest wood gives 20-30 FPS and 314 with an FPS of 10 ,nothing is known about patch 1.1?
Paul Tambov wrote:
in the settings for NVIDIA DS turned Vsync to adaptive(half the frequency), in the global settings: texture filter - high performance and dnodisplay performance
Man, I don't give a shit where these settings find? I have seven, I do not see such items, they may be called as something else?
PS Thanks, understood, I'll check
Daniliss
The control panel of NVIDIA( the green box in the strip start) or the right button misecky rabchenko on the table!
Evgeniy Liventsev
On my GTS 450 runs, but the game starts to constantly freeze for a few seconds, and long to boot as if it was lacking memory. Play becomes absolutely impossible.
On account of the driver 314.22.
The GTX 670M, the Difference is small, and not in favor of 314.22.
Something like this: the old driver at 800x600 and low gives the same fps as on the last driver when 1360х768 and low quality settings (except textures, they are on average).
siame
you need to read carefully, the driver 314 only for the 500 series and 400
your 670 to refer to the series 600
Evgeniy Liventsev
I'm afraid 450gts today does not help the driver only for gtX 500 series and 400
about the patch 1.1 maybe it was fake from the site reddit, as the information about 1.1 and nowhere is there even fromow.
beat in the search patch 1.1, the link to reddit, where the top comments reveal the essence. As for the meme Is in order to gain classes.
According to the logic, now version 1.03 and then immediately 1.1.
Put 314.22. Now in FullHD 30 fps (on high, on low) gtx 660. So that the 600 series works is
HAVOK_RIPL
I checked on the 650 and 750, the effect was worse. more tests, more results)