gtx550ti and gtx650 you here. (Dark Souls 3)
In General, I have stable 30 fps and smoothness on gtx 650 1gb. Percents i3-2125 and 8gb of ram.1600x900 on all low and off except for smoothing.
Have at least 30 fps in the beginning, the fire temple was just a wild friezes and fps to 10-15 if you look in the direction of the blacksmith in the fire temple now 30ка stable.
My response:
Put 10ку(important), latest drivers in the NVIDIA settings for the DS turned Vsync to adaptive(half the frequency), in the global settings: texture filter - high performance and dnodisplay performance.
For the 550ti and indeed the 500 series (maybe 400)
Hammered into search nvidia 314.22, swing for 7 (it does not matter if you have 10kA).
Having removed the driver prog DDU in safe mode (Display Driver Uninstaller Google searching).
Rolls 314.22, remove the checkmark from Nvidia driver updates.
Repeat the procedure in the nvidia panel global settings. (Vsync optional)
In the end we get 20-50 fps vs 10-30. If you put Vsync will be less frisii but these drawdowns to 20 I was only in the fire temple, then it was always more than 30.
in General Hello. Help. 560Ti 384 cuda, stone 3570K all overclocked. All games work great. With the latest Dark wood goes, but no more than 20-30 frames, friezes to 10-15. Put 314,22. White screen and the message on cessation of work. What are the options?
And by the way the wood has ceased to run Doom. Although 35-40 frames were given.
crazy_abricos
10kA worth? if Yes then in my case it was so. Runs in a window with white screen, I if you click it highlights the message on the termination of work, or to wait for a response from the program which I pressed. Waited and everything works.
nominar wrote:build for 150 bucks ,estesno all BU ,really hard from Breakfast to gather up
For 150 bucks, this PC not buy.
Paul Tambov
In short shaman shaman. Spit did the same as you.
1) Put the game settings to The Lowest. All removed shadows, antialiasing, all is off
2) out of the game so the settings are preserved.
3) only After I climbed into the nvidia Panel , Manage 3D settings, Program settings,
Add The (Dark Sols 3.exe)
4) Put as you in the screenshot above: Vertical synchropulse - Adaptive half the frequency.
5) run the game in game settings no longer laziyu not correctyou, etc.
Miracle runs more smoothly
Summary: the Driver is very capricious to settings during the game.
And if something change all Khan, the Driver crash and then have to work not so smoothly.
This during a game, step away and change the quality of the graphics, etc
Intel Quad Q6600 4 x 2.6 Ghz
RAM: 4Gb
Video: GTX 550 Ti 1Gb
StormX07
I am even not really sure, during the game the driver was tampered with?)
GTX 650, i3-2120, 8GB operatives.
1) First installed the game, was appalled by the brakes. Adequate fps only at a resolution of 800x600, everything on low. No, it will not work.
2) Put the driver 314.22. Now I can play in resolution 1366x768, fps jumps somewhere in the range of 25-60. But start constantly throw the game. So it won't go either.
3) Return back the latest logs (364.96), put Vertical synchropulse - Adaptive half frequency global settings Mode dnodisplay compatibility.
And... nothing has changed!) Besides that the flight was gone.
In short, this is some nonsense, I hope that developed a fixed patch...
nvidia 314.22 720p 30fps lowest
Paul Tambov
you during the game in the driver dug?)
No , I'm talking about something that does not need to change the graphics quality during the game.
1) Changed
2) out of the game
3) Updated the nvidia Panel - click Apply.
4) Downloaded the game on FPS change
Yurkaa
The same system of laptop, only the i7 and eight. Firewood only 347.88, below no. Put, tried. from 17 to 37 frames unless you restart the laptop, starts to flicker the texture and you can more or less play only until you restart the laptop).( all at lower levels, in windowed mode, 800 x 450, and configure a video card for performance). And so from 10 to 18 shots.
SHAGGY67
on the laptop below no.
there only must be sought. Get in search my video card and the game, for example Tomb Raider 2013
StormX07
Guy), in the archives of nvidia, 600m(mobile) series, 347.88 lower. Because the wood of older, full brothers, different. If it was, they were happy.
PY.Sy. So-how come the fix on the 41 meter, fps increased by 4-8 frames, but when looking into the distance, more uploaded Loki, still under 10 fps drops. 10 fps seems a lock for this game, below is not falling...
SHAGGY67
In the search enter 314.22 notebook, and there already understand. I then put the 314.22 and statsionarnykh at 7 all run. Play on the lowest + in the file of invidia on off
Yurkaa
+ in the file of invidia all off
I do not recommend everything off
Power supply mode if only the maximum production, and then ?
Paul Tambov
Thanks for the topic. Set 10ку and I find it very helpful in game performance
Not in vain in the subject write in 1 message that 10ку to put definitely.
My old man i32125 2 cores, 8 gigs, gtx 650 normal politovskaya. Sat on 7ke to the last until horrified 10 fps in DS3. Put 10ку and already 2 times going through the game. There are some locations where fps sags of hell, such as fire temple and Locke with the dragons. But everywhere keeps the fps from 35 to 55, to play comfortably.
Very good - to put the axis for one game.
I feel there were more than minions of the Borg, than those who can really help.
Tried all of the above. FPS did not rise. 314 firewood to put did not become. Brad rolled back to an older version.I have other games there that I failed and that a rollback can affect. I think you need to wait for update, where fixed optimization.