Msi geforce 1060 6g

ucher.u wrote:
Like here video live to change, having read the local clowns.
says the person with 4-channel transient processor index k on the B250 and 2-channel gtx 960, which is constantly palitsya resolution lower than FullHD, but it SUPPOSEDLY 4k. Do not tell here your trolling, no place at all.
And what does it actually mean live, enabled? Who in their right mind and a bright memory will change to none on the PC. Here, these tips present.

BezNika1 wrote:
no . but 100% will reset the BIOS if it is blunted slightly.
I'm telling You that the PSU provides power to the motherboard without the battery, and nothing will reset until you power off from the outlet and do not discharge residual energy in the PSU (I do not of electric power, probably the capacitor or coil, the inverter, dunno).
BezNika1 wrote:
But where DVI-I output on GTX1060
He does not pass the POST CODES and nafig hangs, giving error. What kind of cable, it doesn't matter. Where the stage bug check climbs, and it seems specifically the video card or slot.

VOVAN WOLF
But where DVI-I output on GTX1060 ? What side are you it )))
The question mark seen above ????? I asked him a question.
And what you wrote I do not deny.

BezNika1

Felharim
read about the unit ,like enough ,even with the head on it 2 shnurikom 6+2 ,try the second ,I think the case in the food .
When the system fans start and lights on its a burn?(at least the backlight) if not ,then 100% of the matter in nutrition .

1)plug another cord
2)update биос3)to stick the old card to make sure Jack was still all right
3)wotkout new vidyahu to another com if possible

p.there's more options for overclocking CPU to 4.5 samacai and apertivo at least to 1.6 ,and there to 2 100

Felharim
em a th is it so crooked ?
very crooked ,tashelka on the nest salakot?

Still the BIOS doesn't want to prosyatsya

SPR1GGAN
I did not screw slots vary from this, not what we changed

SPR1GGAN
It has power everything works it is lit even without the advanced power BIOS brain makes
sewing doesn't want to do via q-flash and via the boot menu

And as I wrote above when the monitor is not connected the card BIOS beeps 1длинный and 2 short times

Felharim
because you're not the BIOS you have put on a flash drive H77 and Z77 is needed ,I'm higher than the link thrown at him from off site http://download.gigabyte.ru/bios/mb_bios_ga-z77-ds3h_f11a.exe
version F11a as the races are aimed to update the Improve PCI Express x16 slot compatibility

let down your bag ,maybe someone will notice the difference in something

Felharim
by the way, while comparing the pictures ,you have the SSD on the motherboard plugged into the 3Gb satanic instead of 6 gigs ,the speed is suffering,test your SSD and hard done by changing the connectors

SPR1GGAN
Next, just reflash and everything is working don't understand the current why do I get ventilatory not spinning

Felharim
there is a scheme when they start spinning to achieve 60 degrees ,and in passive mode
but if annoying can in msi afterburner curve speed cooler temperature to set

Thank you all especially spriano)

Felharim
glad to help ,the more I myself have had the same problem and I remember sitting on pins and needles
percent and memory overclock going?

SPR1GGAN
I mean?)

Felharim
well, you have a processor with index K ,he is being driven to almost 5 GHz ,but you have a cooler with 2 tubes ,I think it's 4-4.2 take
and you have the RAM at 1333 ,1600 will take 100% and there maybe higher
the motherboard which is not what but overklokerskoy on Z chipset for overclocking

https://overclockers.ru/lab/show/40515/Razgonyaem_Sandy_Bridge_Intel_Core_i5-2500K

Felharim
the multiplier of the CPU to put 40
and the multiplier memory 16
if you like to do ,you can bus to play with other multipliers
poke the RAM timings and raise the frequency