MSI GTX 1060 6gb ( memory Hunix )
Please tell me. Here are the overclocking settings not much torment card ? In tests and games do not crash. Anyone have any settings worth overclocking ?
[Denis]
In osnovnom in Assassins Creed Odyssey. Is a limit to 40 fps. High graphics settings. Can't beat the friezes with the appearance of fire. Especially in large quantities. FPS does not drop so much. But the review camera frieze PPC. Because of this 40 limit. And 50 is stable. Percent of FKH 8350 4.5 acceleration. Memory 4 rapagnani strap to 800.
RyaN174
Friezes from the ssd, the game likes it if the Hdd will be friezes and so on.
X_ray_83
Is on the SSD. The temperature is more 65 does not rise. Possible curve optimization. Always had Asasinov. Maybe in a few patches the rules will be.
RyaN174
the resource affected by the temperature ,if everything is normal then no problems should be
all about overclocking here https://forums.overclockers.ru/viewtopic.php?f=3&t=560545
View the load on the video chip in the friezes. in the same MSI Afterburner. The same applies to the load on the processor.
Egik81
100% jumps in and percent. The fire looks odd, to put it mildly shit. And the system partying wildly.
RyaN174
Well, I'll see. While play around with the settings of the profile-level graphics. Let's see where the freezes will be less. And compare the settings of these profiles with each other. So it will be possible to understand what setup or settings affect the display of fire. Well, then hopefully see what I mean. ) I need time to myself to test. Unsubscribe at a later date.
Egik81
Disabled full-screen reflection wet objects. Visually, especially the quality fell. While flight normal. While the pancake is almost went the entire game with these friezes.
RyaN174
Waste at home. I have the fire did not affect the number of frames.
Spoiler
Built-in test generally showed no funny picture((
Friezes causes the processor FX! You are not the first who encounter it. This stone is very outdated, and was never a great solution for gaming. The problem in it. Google. YouTube is full of videos on this topic. Friezes in the last games associated with it, and 1060, this stone is not able to pull inherent in the map level. FKH in 2018 does not drag..(((
Download 3dmark and drive straight for 30 runs stability tests fire strike, fire strike extreme and fire strike ultra, if it doesn't crashes and artifacts, then your acceleration can be considered stable, otherwise I'm cruising frequency to the appearance of stability or Vice versa to raise it to the appearance of instability)
RyaN174
Friezes make this video (IF You have win10, I think 7, then skip):
Spoiler
If it helps, the case in Windows. NO CPU overclock with RAM (correctly).
Don't know what settings, but on high gtx 1060 needs to digest this game in 45 frames.
Overclocked video card is tested using FurMark with smoothing in 8хМЅАА and high resolution (suitable to greatly subsided 3200х...), about 10-15 minutes.
Importantly, temperature is not perevaly much. In General, do not see much point in overclocking for the video card alone Bastida, you can edit the voltage via the CTRL+F and unblock further increase in frequency.
Overclocking, raising the voltage, and thus increase the heat dissipation and power consumption. I didn't realize You locate FPS, but actually playing with the overclocked video card.
There's another Listoman says it needs to load better and not on locks FPS to feed here.
alternat1ve wrote:
1060 this stone is not able to pull inherent in the map level. FKH in 2018 does not drag
Don't need stuff to carry. It works even with 1070. Long ago the forum went through. However, there is another question - not optimized Odysseus, who uchityvaet all the top systems, the same i7, I'm not talking about the i5 already and even 1080Ti on ultra settings 55-65 frames.
VOVAN WOLF
The percents are dispersed to many e 4.5 + raised not a lot of voltage. The North bridge frequency is raised from 2200 to 2400. RAM also raised the frequency from 600 to 800. 4 planks are in the 800 in dual mode. Loco fps due to the fact that only 40 consistently does not frieze with a large Alicante fire. Now removed the reflection of the full screen. 50 is the limit. While only a drawdown of up to 40 batches. Overall, even with 40 very comfortable to play. Well, asasin has always been curves. Lara new high is consistently at 40-60 fps. etc
RyaN174
Soren, yesterday I read the topic, the above is another comment for overclocking.
RyaN174 wrote:
RAM also raised the frequency from 600 to 800
AMD is very sensitive to RAM, I believe that 666 and 800, or 666*2 = 1333 and 800*2 = 1600. The RAM should be output to 2133 / 2400 (or 1066 / 1200) and iterate subtyping.
Important values in subtyping have tREFI (refresh interval dram), need to put MORE, the value calculated is of the order of 12000/14000 at 2133 solder can be accurately and tRFC sneham to the lowest worker. Run the tests in the IDA on the stability of the memory.
PS AMD may not be tREFI, I AM4 on something, it's not just me.
Read the topic: http://forums.playground.ru/hardware/processor/razgon_fx_8350-967934/
It's all about acceleration and comparison tests. AMD need a good RAM with more frequency, and beautiful primary and secondary timings, it reduces the latency (delay), raises the speed of RAM, FPS, and overall performance.
What indicators in АЙДА64 test the cache memory, now?
I have:
Overclocking your RAM is not what, yet what I see. Of course, overclocking if the motherboard allows (for RAM), but he really needs 2133/2400.