What could be the problem.
Please tell me what could be the problem. Replace the system unit all except body graphics card+hard left as the additional drive (previously it formatnul). Put the system on a new SSD. Start the system everything is fine. Start the game any, 20-30 minutes all flies perfectly, then starts to hang and fail sound (normal fps shows that under the bug and without it). Go to the desktop the cursor moves jerkily and the sound is buggy. In processes load percent no more than 12% at a temperature of also rules. The wood swung from the motherboard and using geforce experience.System: windows 10, percent AMD Ryzen 5 3600, card Radeon 1060, DDR 4 32 GB, PSU 600.
P. S. the computer is not very understand.
Kastayn
Great outdoors on Razanah. If no trottling due to overheating at the VRM, then look in the direction of the voltage Soc. Get first hands to 1.1 V.
The maximum that can 1,125
So try less, if not help, from 1.05 to 1V.
If my friends, then you look in the direction of the VVDP -VDDG of voltage.
Before all this procedure, update your BIOS to the latest.
Why would he give this advice. Because of Overclockers seen such problems, often helped by adjusting the voltage of Soc.
Can drive testmem v3 from 1usmus.
Still advise to check all nastroiki of voltage and memory DRAM calculator for Ryzen v1.6.2
https://www.techpowerup.com/download/ryzen-dram-calculator/
If you do this is difficult, try to write here
https://forums.overclockers.ru/viewtopic.php?f=2&t=615037
Write the Full config PLS. The presence of ACCELERATION. Put the maximum possible equipment of a PC with the settings of the iron.
Was such garbage. Put in a comp stick and all hell broke loose. Mouse creeps jerks, tried to open it on slave the table is a folder with files I wanted to throw, so you can take a bath and drink coffee until it opens. Have vytknul I will use it again and all became norms.
And since SSD is nothing like a big flash drive, then XS he may be buggy.
X_ray_83
Dude, you have risen 3000 series?
Don't be ridiculous. All energosberegenie work perfectly on this platform. Moreover, to get the maximum profit it is necessary to put powerplan from 1usmusa and all energosberegenie enable in the BIOS.
So, go better your way.
95% of the problems users from their Ignorance, in other cases, the 3% soft and 2% iron.
Ryazancev
Have problems in Windows 10 and therefore there is such a utility
https://community.amd.com/community/gaming/blog/2017/04/06/amd-ryzen-community-update-3
So don't get smart you Ryzen Master don't use because you're useless !
X_ray_83
You come on Julia, you have 3000 Riesen?
And question number 2: Why do I need the risen Master? This utilitka for lamerov unique?
Dispersal of individual kernels and CCX I do not nuzhon. And in Some BIOS this is easily done.
Kastayn
Ryzen Master put !
https://www.amd.com/en/support/cpu/amd-ryzen-processors/amd-ryzen-5-desktop-processors/amd-ryzen-5-3600
Then need to put in power management this is it !
Ryazancev
Because you're a LAMER with this prog FPS more and consumption is less ! It fixes the jambs of the Windows with High Performance and power consumption !
X_ray_83
Since you have no 3000th Ryazan, let me explain.
1. PowerPlay installed with the Chipset driver.
2. This is not the best way to work with these percent. And the best, powerplan from Yuri Buble, he 1usmus (author rayzen AMD Calculator) Microsoft as if he was making edits in the updates, latest patches Vin10 on the AMD platform Ryzen 3000.
3. Pass by, otherwise, GO YOUR way.
By the way, before you throw links, pay attention to the date of publication of the article on 4/26/2017 paperplane Update!
At this time the Riesen 3000 not that it's not out yet...
That's about what I mean
https://www.techpowerup.com/review/1usmus-custom-power-plan-for-ryzen-3000-zen-2-processors/2.html
Ryazancev
Everything is configured in Master Ryzen no need to go into the Bios no the more the topic can not !
Here is a couple of boxes and put everything will work all the rest of the cooling depends !
Spoiler
