Rx 460

if she did not have enough power while it is up to 72w in furmarke ate flies and not even within 12 hours and the fact that pci3.0 the manufacturer says supports but does not require

Pavel7636
The point is that it should work without dances with a tambourine. How put maps on 775, up to ГТХ900, they are all without problems worked, max had updated the BIOS, but they were all in 16 lines. If this feature of amuda, then those chips it may not work. He write that the son of Amade it works.
But, personally, I'm 100% on this issue can not say anything, because those cards did not face.

Pavel7636
ucher.u
ucher.u wrote:
if she did not have enough power while it is up to 72w in furmarke ate flies and not even within 12 hours
The version about shortage of power and curve connector is interesting and is quite right to life, but there are a couple of inconsistencies: in the BIOS at 460-x TDP sewn at 45-50W, besides, there are versions (e.g. from ASUS), where the contacts are the same as other cards, but the problem is still there. Plus: not only when you run furmark, and comprehensive stress tests (Aida, SCR), the problem is not evident (although it should with 100% certainty if there's a shortage of food).
If anything, the platform does not matter on AMD systems, this problem is also manifested.

Pavel7636
Again, this topic stopping up holes, this card is stable and without issues ONLY work in PCIe 3.0. Your motherboard supports PCIe 2.0 x16. The owners of the old Mat. motherboards have problems.
Any decisions, outputs and explanations You can find on this link:
http://forums.playground.ru/hardware/video/problema_s_asus_radeon_rx_460_2gb_oc-925268/
There are also attached I have broad themes:
http://forums.playground.ru/hardware/video/help_lyudi_videokarta_dual_radeon_rx_460_2gb_gddr5-922535/ - Help people,video Card, Dual Radeon Rx 2gb GDDR5 460
http://forums.playground.ru/hardware/video/rx460_ili_gtx1050-925003/#comment-15841053 - http://forums.playground.ru/hardware/video/rx460_ili_gtx1050-925003/#comment-15841053
Look, read, delve. All there is for solution. Otherwise, it is too late, CHANGE to 1050.

Len4ik00N
There's even if you have all x16 contacts they do not work and beauty !
In General, I don't understand what the conversation the card has clear requirements, and a modern motherboard 3.0 version.
And all the cards with extra power better there frequency more is cutting/trimmings sickly !

Pavel7636
and the fact that pci3.0 the manufacturer says supports but does not require
This suggests that not guaranteed to work on PCI Ex 2.0 a that there is backward compatibility and so, this is all irrelevant, there are clear requirements !

thank you all