I7-6400t. QH8G A0 c442a719.
Hello forum users. Actually the problem with inzhenernym qh8g.Does not work consistently:
1. Browser page progruzhat through time, falling layout, the video does not play(most likely flash crash) and the files are downloaded through time.
2. Fly games, maybe 10 minutes, maybe 15, maybe an hour or two to fly. The error log looked, nor the video driver did not fly, nor anything specific on the hardware there. Error-type Locally activate and all.
3. Windows works very badly. From concrete work update.
What was done:
1. Filmed the dispersal of partially and fully frequency and the tyre partially and memory. Drove with profiles and without.
2. Tried different BIOSes, eventually returned to the mod BIOS from overclockers(who knows that will understand).
Sewed as programmers and via the Internet from under the BIOS.
3. Wind changed about 10 times, on three different train, with a full format.
4. Tried to manually put the updates Windows microcode for intel.
5. Changed 1050ti gtx, gtx 970, r9 270x and gtx 760.
As I understand, nothing helped.
Where pulled to mod the BIOS - I can throw in BOS, the statistics on which the searched for the problem is qh8g, also you can throw in Ls.
Of speculation:
1. Read about instability (literally: powerful graphics cards in pci-e x16).
2. He looked about the microcode, I found that the version of the microcode for c442a719 (this is important!) 17H, and I have a mod BIOS is under c442a722 the firmware 18H. The Internet is about c442a719 is not even a word, but the firmware under it is not to find even more. Actually out of ideas to register it manually using hex editor the microcode, but I don't know shit about and won't go there.
3. For correct performance it is necessary to switch the mode of the pci-e from auto to gen2. - have not tried it.
Understand that qh8g - this is another hat and write about it is not necessary, but to do nothing, MB have any options to make it work properly?
Now, actually, the config:
Mother: Asus Z170-PRO Bios V1902(Mod)
Percents: I7-6400t QH8G A0 c442a719.
Memory: Kingston HyperX 8GB 2133.
Video card: GTX 1050TI.
HDD: WD BLUE 7200rpm 64mb.
PSU: corsair vs650.
Please write on the merits.
PS the Legs are not bent.:)))
Have you ever thought what is percent and ingeneric that it was done for testing? and of course it can have bugs, which are then corrected. So here you already can not do anything. Yes, and in addition could make different versions of ingeneric to test different design options.
MagicHero
I'm sorry, but I'm not really getting the point of your statement... I described the problem, attempts to solve which have taken and possible solutions to my problem. In the responses I was expecting criticism of my actions and additional proposals for addressing the problems described above. The Pro version inzhenernih: Yes, a lot of them, that's why I said that I qh8g and he's the curve in the Board.
PS. the problem was solved by raising the voltage of selection level profiles.
Dmitry Viskarya
Windu you put different versions??? 7 -8 -10?
temperature in norm???
maybe memory??? marriage or timings on the straps are not the same? voltage
do all of the problems that you describe the different planes can only connect them virusnyak
lower the memory frequency to 1333 or even lower and see if more stable ( I was such a long time trouble 1 strap did not hold the frequency)
PS Actually the method an exception if you believe that trouble in the process is to find friends or repair and ask them to check the percent and if it occurs the same problem already will know for sure
Beirut
You carefully read my previous message?) Thanks for the reply and attempt at help, but the problem is solved.)
Raised the voltage on the 0.075 - all normally began to work. Windows msdn, so virusnyak disappears from and to, moreover to put with a full format/delete the disks. The memory was in stock, xmp disabled. And friends to ask - so I asked for config not mine.))) Maybe the problem will be breaking up, but a bunch have already given and man he made the runoff.