Everything works, nothing works, no boot
The system in the screenshots, monitor is 1280x1024, the problem is that it doesn't do anything, regardless of graphics settings. In the screenshot of the Squad, the problem is also in GTA V, Rust, although in the past when the system was 6 operatives, an old mother all worked fine and ractice was 100 frames and gtashke normally, apart from the Frisians for aperitivi. I don't know what to do pray to God all to no avail help people before I sell myself too. The system was 7, the same, now 10 - the same thing. Is the processor ?
Denis Kyokushin
It's the pirates, the Prots under the hood I think there is already nothing for 10 years, well with the sensors or something.
Denis Kyokushin
Well to me that with this information do when something on the box the cooler about 2 years ago, he and up to 100 degrees basking(on runoff frequencies,due to thermal paste) may only have occurred degradation, and may have happened to me.
markizdekarabas
Well, I have at this stage in the old system, Phenom ll x4 965.He even when raising naprugi above 1.5 v is not heated to the provisions of 62°. He used, 2009 release.But how much it was used before me, I don't know
Denis Kyokushin
I have a Zalman Optima tower CNPS9X, I don't know chevo he's so hot, because the base of the heatsink is only lukewarm.
markizdekarabas
strange as it is ,if that was the case with iron 120 frames, even in the old game would not be
temperature really is the limit for percent to 72 degrees -probably this implies of the troubles ,although overheating should be trolling frequency ,but maybe because of the settings in bisoi he wouldn't .
Try for a test to throw off the settings of BIOS to default and drive so
Here is a screenshot of Rasta, fps like the rules, but the video is not loading properly, well, a fps when the server 30.
SPR1GGAN
The same thing, this problem has been to disperse and, if it's important, with another RAM.
markizdekarabas
markizdekarabas wrote:
I have a Zalman Optima tower CNPS9X
On my AM2+ tower Zalman CNPS10X Perfoma with two valves:
Spoiler
If it was better,the only thing that remains is the installation of old wood.Not rolled back,namely the removal of a new and clean installation of the older.And yet,maybe something you overlooked?