asus Cerberus 1070ti new heated in a simple
the temperature at 1070 when the PC from 63 degrees to her was 1050 - 30 degrees.vitalii_08
Look in the Manager is there a process NVIDIA OpenGL SDK Framework Component.
vitalii_08
This is normal, as soon as it starts loading the cooler zavershilsya, 60 degrees is nothing for the graphics card.
How much under 100% load in furmark?
Alexander Kozlov E.
What nonsense, do not talk nonsense about normal, the temperature of the new card when you start Windows without loading ranges from 24 to 40, but not 63.
So there is 2 Varick, viruses and marriage
vitalii_08
In the simple norms of temperature up to 45 degrees. It is a buggy driver or a virus. You need to watch the core clock in idle, look for some 3D app is running and loads the video card, the same as an option. If the drivers didn't updated (though they are buggy), the viruses that create the problems.
TheHouse
Nonsense in your head, in a modern graphics card cooler do not get it to 65 degrees or the load more than 20%
In my simple also 60 degrees, only Windu reinstalled.
It is specially made, that would have been less difference in temperature. The crystal degrades more slowly.
Alexander Kozlov E.
Under these conditions, in simple VERY much. I have three video cards are (one previously sold). Idle no more than 45 in real life 38-43 changing. And so the difference in temperatures is still there, merely used passive heat transfer.
If so, very bad cooling in the case, even so, I don't know what is so warm we need to have 60 to simple.
Alexander Kozlov E.
I have a 1060 with one cooler under load max. to 63 to 67 degrees and it warms up to 55% of the speed of the cooler, in idle 38-45, you are there sitting in the bath or something? In idle the card is 60 degrees to have though you burst.
Disconnect the Internet. If the temperature begins to decline, the virus-miner. If not reduced, then the problem is with the video card. I had that. It turned out the virus.
vitalii_08
http://forums.playground.ru/hardware/video/nuzhna_li_zamena_ohlazhdeniya-963045/#comment-17432555
Alexander Kozlov E. wrote:
In my simple also 60 degrees, only Windu reinstalled.
This is not normal and speaks only about the problems with videhi or as already wrote above miner,I GTX1080Ti on average 35-45 idle and it should be due to the heatsinks of the video card,although the reference maps, the temperature may be higher because there WITH worse and then of course also depends on the enclosure and the temperature in the apartment.
Alexander Kozlov E. wrote:
In my simple also 60 degrees, only Windu reinstalled.
I checked several antivirus and nothing was found, but after formatting and reinstalling Windows temperature alone was normalized (32-34 degrees). Where and how I caught this virus do not know, but you have reinstalled Windows and the temperature is high.I don't know.
It is possible that I forgot the details, but I recall that a number of manufacturers default set function when the valve was switched on when reaching a certain temperature. To this klad in passive mode.
But 60 degrees is still too much.
Judging by the fact that the author not communicate to, then it is not required)
Alexander Kozlov E.
Alexander Kozlov E. wrote:
Nonsense in your head, in a modern graphics card cooler do not get it to 65 degrees or the load more than 20%
In my simple also 60 degrees, only Windu reinstalled.
60 degrees in idle and with no load it's horror, it should not be. I even under load, rarely to 60 comes. So see what you got there in the Cabinet behind the stove because simple vidyuhi do not emit as much heat to 60 to warm up.
PS Is on the Founders Edition fan actually stop?
why is everyone minus those who write about passive cooling?
if the cooler does not rotate at all as it races to 60 in a simple card may be hot ,but to achieve 60 cut fans
I have a 970 from Palit is the exact same scheme ,but I cut it off and put himself ,and it is not fun when the screws then twist the stand ,they minute of pokurili degrees fell ,then while standing, he rose again, and so constantly ,it is better to let sensitive in a simple twist ,the delay to 30-40 .
but I'm not sure what it vidyuhi with the same function ,easier to check the load on it and the cases in 2 minutes