Overclocking monitors
In short the question is. Does that make any sense? I heard somewhere that overclocking the monitor, let's say from 60 to 75 there is some Nai**Lovo and in fact 75 Hertz is the same 60, but if you put 60 it will be like 53-55. Well, like... I don't know. On the eye it is difficult to understand whether there are 75 on that broken monitor or not. In short who in the topic?The acceleration itself is nae.. well, you ponil. Some on the head dispersed the brow apparently was tormented by the question Cho would have to disperse. xd
Any, 60Hz, the monitor is in mode 50-75Hz, depending on the color profile. The cooler matrix, the update below with a maximum color profile. When overclocking just as possible to put the minimum monitor color profile, and just. On good monitors with good color, this is complete nonsense, and is not recommended to do this at all, so as not to ruin is not a cheap monitor. On germanskih monitors it may make sense for the 1-2fps, but at the same time they have so that the color reproduction is not so hot Schaub it even more cutting. If only colorblind to do it, or messed up in the head. Moreover, ninco, Kady is very much in Grifoni depends on the color of the monitor.
acceleration monitor something new or something forgotten peck-peck-peck
so who if the logic reasoning of the monitor regardless of refresh rate of the incoming signal matrix is updated with a certain constant frequency, and it would be strange if it were otherwise
another thing is that they assume there is a difference between the vertical and the horizontal but then the frequency must be increased to the nearest integer divisible by these numbers
the meaning of this notwithstanding, I see little. 30фпс 60 everywhere rather peck-peck