The image on the monitor a little quadratics
Good day! Recently bought a viewsonic 32 inch. But he's acting strange. When viewing videos or playing games with a sharp movement (and not only with it), the image begins to "quadratics" like pixel boundaries become visible. Can you tell me why this is happening? Maybe I have something not configured?Anna555
Model, resolution, gertsovka, Free Sync, G-Sync? Both connected - HDMI, Display Port?
Anna555
It is necessary to put in monitor settings, response Time Standard. The 27-inch NEC display solutions GmbH 2776 -SMHD. With other settings response time artifacts can appear (especially on low).
If I understand correctly the question, it will be a solution to the problem.
Ryazancev
Looked, is standard. And AMD FreeSync in the settings supposed to be available? I can not select it.
Anna555
Looked test this monitor, artifacts are not supposed to be https://3dnews.ru/960706/page-2.html.
You have a video card what is (manufacturer and model)?
Need to Settings Screen" (Right mouse button on the desktop for Windows 10) the graphics adapter Properties tab Monitor to put 144 Hz. If you are already worth to change to another setting and check for artifacts.
As I understand it, for Presenca need to connect through DisplayPort and enable the option in the driver https://www.ixbt.com/video4/amd-freesync-review.shtml
Ryazancev
Nvidia geforce 980. Tried 144гц to do and everything was blurred as in a completely wrong resolution, weird
Anna555
About this technology you can forget with this video card. In the control panel of NVIDIA go to Change resolution (left column). It is necessary to choose 1920*1080 and the refresh rate at which no artifacts (starting with 144 Hz).
Anna555
Here, you can in control panel Invidia (right-click on the desktop). Better in control panel to change Invidie.
And in the monitor there is a setting Gertsovki 144?
Can you have frame tearing occurs without Vertical sync?
Ryazancev
Don't know why, but all but 60 Hz makes the screen blurry, but the screen is not affected
3.0 L
Well, I meant that initially is 60 Hz and the screen of the norm looks, but when watching videos or playing games the problems begin. And as far as I understand, to put 144гц - one solution, but not yet beyond.
Finally it dawned on me. DVI-D is unavailable due to bandwidth standard. You need to purchase a Displayport and it will work at 144 Hz (only good, brand).
I have DVI-D Maximum turned 65 Hz with HDMI - 75 Hz.
But something tells me that the problem is not in it. Something buried in the settings of the monitor.
Anna555
I like wrote above. I have above 75 Hz is not ale. Need DisplayPort 1.2 (It comes with the monitor, look in the box!!!!),
HDMI 1.4 does not roll.
Ryazancev
Don't even know what is possible in the settings to do so. They like a little, but don't know why the picture is buggy.
Yes, exactly, comes. thank you very much to pay attention!
Anna555
It is necessary to personally look how buggy this is not entirely clear. It is necessary to connect with the right cable, set to 144 Hz. You can even reset the monitor to the standard. Should all work properly. If not, you have to hire a specialist, and it is better to bear in service for checking (setting). Even the warranty Department of the store where it took (preferably with your system unit). There is a kickback can watch.
Maybe you are fine, just movies in bad quality (and games like minecraft?). With this monitor 70-100 cm from the screen all will be quadratics.