Mount for cooling

AM4 sort of compatible in size with ам3 so if the cooler is compatible with ам3 and there are mounts from him is likely to buy do not have to. otherwise, Nada cooler is completely different. don't know what to dispensers especially cheap separately fastening.

MunchkiN 616
and where does ам3? If I now 1155?

Serega666's
I understand you bought a ku-ku-ru-Zen. if you changed FKH AMD or similar CPU on an old cooler you could put like how.
and the coolers are usually universally designed to mount to different sockets (and that some point ам3 already had). so that with some probability it can be assumed that the cooler will be on the CPU if not lost the mount for AMD processors or whatever it is fixed... if not a bunch

MunchkiN 616
so, look for the attachment in the Internet? or my oklad stand? Klad was bought in 2012

MunchkiN 616
1. The holes themselves have AM4 others (Recently put noticed), but the plastic tabs the box can and will become. On some motherboard 300 series of holes for AM3 and AM4.
Serega666's
What Salmanovsky of klad?
And what exactly is pebble?

Serega666's wrote:
Ahlad is from the Zalman all copper.
What is the model?
For these:
Spoiler




the Chinese are already mounting even under the latest from AMD. One person at work recently ordered a mount for Zalman 8700 Cu under AMD Ryzen 7 3700X. You can ask... I give you the link in PM.

Ryazancev
Oh hi, how are you always here. The processor will be ryzen 1600. What kind of ahlad can not say exactly, because I bought it over 7 years ago, MB image as it will help.

airstorm
threw the image

Serega666's
Similar to the Zalman 9700 (the last picture posted above).
You need to put it on here
Spoiler
so, I understand correctly?
And this circuits
Spoiler
lacking length?

airstorm
I don't know long enough or not enough. What exactly should I look?

Serega666's
That's the standard set of fixtures for sinks Zalman supplied. I pointed out the mounting socket AM1,2,3.
Spoiler
Maybe he's a little shorter and it locks 't reach these fasteners?
Spoiler

airstorm
These mounts must be complete with ohladom? If so then I don't have them

Serega666's
if not mounts, then have to search separately.
If percent will go to a boxed cooler, it is in principle not much worse than your Zalman.
I would and did buy some inexpensive tower to 500-600 rubles and soared (the same deepcool gammaxx 200T) or any 3 teletsunami with Alika

Serega666's
This cooler put Core 2 Quad in 2008 orno ))) Buy the normal boxed cooler and not to make people laugh !

X_ray_83
Strange that you're funny, but if kicking your finger near your face you too would be funny?)

Artie
So if you take the new klad then it is normal. Simple with the 1600 I think the move later on 2700.

I Pitch suspect that the author of this cooler peck-peck
buy modern in the area of 1500-2000 rubles it is about efficiency will be

Serega666's
Not funny by the fact that it's a shitty cooling from the word at all ! Any tower for 1000 rubles'll do him )))

boxed cooler from 1600 would be enough since it is not very hot Dissipation 65 W cooler and look but not overpay if the drive will not

X_ray_83
And so you will be funny by the fact that this klad was purchased 7 years ago for i73770 have assumed no acceleration and so forth, and why I was buying so-called any tower for 1000 if this is enough?