The problem with 1080ti
My PCPercents: i7 4770k
RAM: 16 gb 1600
Mat.Fee: MSIZ97 MPOWER
Video adapter\card: Inno 3d 4x 1080ti(Not ultra version )
Power supply: 800W
I will be talking about 1080p screen resolution.
Anyway , I bought this card back in November 2017 , initially I checked it on 3 games. wolfenstein ,the evil within 2 and Middle-Earth: Shadow of War.All 3 games was perfect .
Middle-Earth: Shadow of War: 90-120 fps(via the benchmark were given even 180)
Wolfenstein the new orden: no subsidence 60 (vsync on)
The evil within 2: no subsidence 60 (vsync on)
(All of the above the game at the very highest possible quality of graphics)
Then I decided to go and play GTA 5 and saw the shock in 37 to 60 fps online and on the benchmark . Well of course I first got on youtube and saw that people with my performance ( graphics and CPU ) between 90 and 100 fps in the benchmark.
Well, I climbed on the Internet to look for what and how, and noticed that a couple of people wrote about bad optimization and about similar to 1080ti well and calmed down for a while .
So I then decided to test the graphics card in 3dmark ( the license just go with the video card for which they thank you ) and saw quite a satisfactory result in 10110-10090 of vidicarta and 2900-3100m with the percent giving the total value of 8,000 where I, too, have completely calmed down.
But yesterday I decided to download final fantasy xv and was also shocked that the game doesn't want to go at the maximum value in 60 fps ( based on the post processing 200 , without it or with 100% post processing without excess issued 60-80). Well, again, the alarmist in me screamed and began to finish off the remnants of my poor nerves contrary to what I downloaded benchmark from Square Enix for final fantasy xv and again showed a normal result ( like the 9200 )
Well, I went again to the Internet to climb to panic on what I choose to throw away 600 euros ) and I saw that the game has no optimization and reading from all and Sundry to write\copy of the article, I calmed down again .
But today I downloaded Watch Dogs 2 and saw that my fps value does not correspond to what is shown on YouTube and now decided to write here because we've found similar problem in other person in with Crysis 3.
If anyone has ideas or better then we found a solution I would be grateful. It's also possible I'm sitting here all nervous for nothing .
Well, for reference a few other game which fps, everything is fine
Warhammer Vermintide 2 - 80-100 fps , in the presence of a larger number of NPCs ,fps drops to 50-60, and is the location where the only reason there prosidaet fps to 40 ( location where you want to shoot a gun on mortars )
Warhammer 40,000 Inquisitor - Martyr-60 fps (vsync on)
Gears of War 4 -90-120 fps (Directx 12)
Counter-Strike Global Offensive-160-220 fps
Elite Dangerous-60 (vsync on)
Conan Exiles-60 (vsync on)
Kingdom Come - 40-60(Depends on the location if this village falls to 40 and sometimes 39 if it's the biggest city there were even 25 fps but according to youtube this was the norm ( as it is now I do not know ))
(All of the above the game at the very highest possible quality of graphics)
Mat. cost on the chipset Z97 2014 try to reflash . The graphics card in it at all to remove . It's better to do it in the service center such as DNS and test their programs.
An__ei
Of course, I do not really understand this but I guess what is worth doing if the graphics card is not responding or just doesn't want to work as a video adapter. The point is that the games on the harder everything works as stated tests, let's say Kingdom Come
there are still games available znachitsya dependent for example, this vectors and Warhammer where bourgeois processor not basinal to ultramopiate game
also no top-end graphics card in principle is not obliged to ultrasonicate 60 fps in modern games, she usually will znachitsya is cross fire and SLI. and even considered a sign will znachitsya bad pitch tone when a new modern map of actual moving game 60-100фпс alone and in the mustache does not blow
but lately Peck God is turned away from the pitch, if people don't have years and normally voschem 30 fps play.
if there is such factes that a certain game is the same build let's say is running 50-60 fps and after a couple of years, the Baker discovers to his great astonishment Pitch edokov 40-55фпс the AZM machinations and the machinations of the developers of the drivers. the case is listed in the streaming optimization, memory access and micro samples of grifoncino. as pravelo mean such legodacta due to the fact that while the card is young and wood naisisili card lupset in a simplified grafone. especially goes is poluprostranstve and every g-buffer calculation Grani transparency mists and fumes. without these tweaks in driverscan card lupset to live with less fps and sometimes with rather disastrous it leaks. also support old cards casually stopped and she did not need to look in a more attractive light. so in short, I driver don't change over the years and spit in the forced AFR I all sorts of pitch profile optimization +20% performance on baking cookie, pawson.
the second point is that some online video reviews use a slightly undervalued selections in the drivers. therefore, until the end to trust them not to be, let's say I have 50-60 frames and he obzorschika all 60+ on a comparable identical hardware. experimenting with the driver settings without resorting to JEM and me were able to slow the video card is almost 2 times or reduce her burden in the deterioration of gravensen which is especially important for skinny cards.
Max Rolens
In these games, may not enter the operating frequency, Mode, power management try to put the best performance.
Had issues on my 970 and 980ti in games like bf 4 sometimes the card is not switched to the operating mode of which frequency is around 400 Mhz.
Either roll back the driver a couple of versions ago.
bloomm
The word is very good advice . Today I put on the maximum energy and consumability of cs earned in the 150-220 fps had Posidonia and not higher than 40-60 . So it is even possible )
Actually, I realized I had to be careful. People the tests why the overclocking up to 2000Mhz (I have 1600) not to mention the processors ten times more powerful than mine . Generally I put in advanced settings on the drawing and all steel 0 to max and everything was working as it should .110-80 at the benchmark . Probably either my percent is not likely to pull this setting