About frequencies
Is the motherboard P8H61-MX socket 1155 Pentium G840. At the office.the website claimed to support the Mat. the fee of DDR3 1066/1333MHz and the type of PCI-Express 2.0.However, such features show up in the description to the processor. In fact, the question now. Whether the mother to pull the memory to 1600 MHz and see if it supports PCI-Express 3.0 if it is to put some i5/i7 Ivy Bridge.
Thank you.
Davecon
Memory - Look in the BIOS if you can supply above 1333. The new (last) BIOS look.
If there is a ceiling of 1333, it will not pull above all. In the manual it is written 800, 1066 and 1333.
About PCI-e 3.0 Forget it. This is only the support of the motherboard, the processor and the memory is not in the business.
ASUS P8H61-MX USB3 - pull memory up to 2400 MHz. https://ru.gecid.com/mboard/asus_p8h61-mx_usb3_/?s=all
Ryazancev
I just thought always. However, all indicated that the memory controller and PCI-E are in the CPU. So I decided to periodicity.
Davecon
Yes you are right, the controllers (memory and PCI-e) in the processor. And in my AMD FX 8350, I think not controller PCI-e the CPU, and the Riesen is already there.
One figure version PCI-e 3.0 should support motherboard. Even if you put a Core i7-3770K with PCI-e 3.0, the mother will still be PCI-e 2.0.
where Express will appear if all 3ххх under the standard CPF-E2? although to clarify something very lazy. the theme of the emergence of the Express 3 is like the current LGA 2011 there is a Mat Board is one and the processors 3 and 4 th generation Souvanna.
about memory - that it likely any will work in this Mat Board defol as 1333. that is, the tou if the memory is 1600 or 2120пек PEK she indulges in some lower dividers. in the worst case pitch does not startanet as the Mat Board will try to run the memory with the wrong voltage for the low frequencies that sometimes with ддр2 and explode
therefore, it is better with that kind of stuff vonitza and all sorts of willow bridge